WISHLIST

synthguy · Post by **synthguy** » Fri Aug 15, 2008 2:01 am

I'm surprised I didn't post it in here.

1. Soft sync.

2. Fine tuning of both oscillators, as well as Sub-Osc.

3. Waveshaping on Osc 2.

4. I know this is reaching, but a Z1 emulation mode.

bsp · Post by **bsp** » Sun Aug 24, 2008 3:25 pm

- a program switch that makes controllers (e.g. targeting filter cutoff) modify only the last triggered voice (instead of all voices of a timbre!)

- as a deluxe version of this feature, the switch could cause ctl. changes to modify all voices that have been started in a given time window (e.g. a "tick"). this way it would work for chords, too.

slammah2012 · Post by **slammah2012** » Mon Aug 25, 2008 3:50 am

bsp wrote:- a program switch that makes controllers (e.g. targeting filter cutoff) modify only the last triggered voice (instead of all voices of a timbre!)

- as a deluxe version of this feature, the switch could cause ctl. changes to modify all voices that have been started in a given time window (e.g. a "tick"). this way it would work for chords, too.

This would be available if the Radias supported polyphonic aftertouch....

If you want controll of independent voices within a timbre / midi channel,
you are on the "same quest' that polyphonic Aftertouch enthusiasts like myself are on....

if you can assign velocity to a controller and hold that information, and use it to modulate the filter cutoff then it would be possible, but till now, all modulation with velocity as the exemption are affected......

again ...If we can get PolyAT on this damn thing....problem solved...

SIDX8580 · Post by **SIDX8580** » Mon Sep 08, 2008 7:37 am

What i realy would like to hear in the radias is an adition wave form shaper like they did whit the lfos

like the lfo's can go from saw to triangle and back to inverted saw

what also would be a good thing is that the lfo's can go faster

i like to modulate the pw / cut off / pitch whit an lfo and setting keyboard track to the lfo(on 48) this works fine on the micro korg because the lfos can go faster but whit the radias i cant go futer than 100hz while playing it reachers to 2octaves and than the modulation goes to slow to get a nice sound out of it

let me know what you guys (and lady's) think of my idee's

X-Trade · Post by **X-Trade** » Mon Sep 08, 2008 11:06 am

SIDX8580 wrote:What i realy would like to hear in the radias is an adition wave form shaper like they did whit the lfos

like the lfo's can go from saw to triangle and back to inverted saw

i think that you will find the 'waveform' parameter for the knobs on the 1st oscillator does pretty much the same as the shape control in the LFOs (okay, there are some differences, but they both offer PWM and saw>triangle shaping)

SIDX8580 · Post by **SIDX8580** » Mon Sep 08, 2008 6:55 pm

Yea i know but the diffrece between the saw>trianagle is that (theres a picture in the opration book that came whit it page 82) when you adjust the saw ther goes one aditional saw troug the original and whit the lfo this doesnt happen.

maby the second osc schould have some sort of wave controle to

slammah2012 · Post by **slammah2012** » Tue Sep 09, 2008 1:24 am

SIDX8580 wrote:Yea i know but the diffrece between the saw>trianagle is that (theres a picture in the opration book that came whit it page 82) when you adjust the saw ther goes one aditional saw troug the original and whit the lfo this doesnt happen.

maby the second osc schould have some sort of wave controle to

Can't be dun......
Radis has no more overhed for DSP ....
Fond that out ovr a Year ago......

There is possbly room for speding up the LFO rate thogh....
I wuld like to see it in the FM frequncies myseff....

CharlesFerraro · Post by **CharlesFerraro** » Mon Feb 22, 2010 11:21 pm

X-Trade wrote:one thing i would really like to see is the ability to step through the step sequencer/mod sequencer using a footswitch!

That's what I'm talking about. Toumal also made a similar suggestion. As I said in another thread, this function would dramatically increase the Radias' ability as a workstation of sorts. No dropout would be necessary for the full beauty of this application.

If its possible at all, it NEEDS to be done.

X-Trade · Post by **X-Trade** » Mon Feb 22, 2010 11:42 pm

CharlesFerraro wrote:
X-Trade wrote:one thing i would really like to see is the ability to step through the step sequencer/mod sequencer using a footswitch!
That's what I'm talking about. Toumal also made a similar suggestion. As I said in another thread, this function would dramatically increase the Radias' ability as a workstation of sorts. No dropout would be necessary for the full beauty of this application.

If its possible at all, it NEEDS to be done.

well, what I actually meant was to step through the individual steps using the footswitch. although some kind of pattern sequencing or switching would be very handy. I don't think we'll see it though - the Radias just isn't designed for it, it doesn't have the physical controls to facilitate it effectively...

It would be nice though for example to have all the step sequences/arp patterns in their own slots and referenced rather than owned by the program (like on Korg's workstations). Then maybe we could step through the patterns or string them together. Again though this is stepping on electribe technology. I admit the Radias could have been a really good electribe (with KARMA too?

), but I think KORG is more excited about their KAOSS products e.g. the Kaossilator pro, right now.

The radias has been out so long it seems unlikely now to see any kind of upgrade, and definitely not to the DSP engine.

I have to say it certainly seems the KORG products have taken a step backwards regarding instant-ish patch changes.

CharlesFerraro · Post by **CharlesFerraro** » Tue Feb 23, 2010 12:05 am

X-Trade wrote:I have to say it certainly seems the KORG products have taken a step backwards regarding instant-ish patch changes.

Yeah its killing me. Oh well, just means I have to be more clever in the songwriting department.

Korg Forums

WISHLIST

Wishlist

Re: Wishlist