I had to hide behind the sofa!pedro5 wrote:Pleasantly surprised that there's been positive responses to your topic, half expected more criticism, gasps of horror…
But, kudos. Admire your bravery.
xx
Kronos key weight changed
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
lonelagranger
- Senior Member
- Posts: 291
- Joined: Tue Feb 17, 2009 2:04 am
Yes…I initially got nervous with the idea,especially if done in situ.
However,the keyframe itself can be removed from the instrument with the work carried out on a bench/table,which could provide better access and better control of the debris during the cutting operation.
Not sure if savont did it that way,or not, as the whole project has gone to plan anyway,it doesn't really matter now,but perhaps worth knowing if anyone else wants to attempt the modification.
I'm still pleased it has been a success !
Also appreciate the documentation,plus photos.....thanks savont.
Best Wishes.
However,the keyframe itself can be removed from the instrument with the work carried out on a bench/table,which could provide better access and better control of the debris during the cutting operation.
Not sure if savont did it that way,or not, as the whole project has gone to plan anyway,it doesn't really matter now,but perhaps worth knowing if anyone else wants to attempt the modification.
I'm still pleased it has been a success !
Also appreciate the documentation,plus photos.....thanks savont.
Best Wishes.
hi, the whole keyframe was taken out, and the stiffening metal brackets that run the whole keybed taken off and all work done on a bench. I took care not to move the sensitive contacts as i didnt want some issue with them moving and the hammers no longer properly hitting them. At the time I knew there was going to be alot of sparks flying around with the associated metal grinded off.. and Later of course alot of vacuuming and cleaning.. The metal grinds could have done terrible damage to the internal electronics. Something i have noticed since is there is a little less of a thud when I play a key, possibly the result of less force required to push it down. The thud is still there but not as bad, which i think is possible since theres about 1/3 (approx 15g avg) less mass now to push the key down.
For me it was either do the alterations or forever keep wishing the action was better, or find another midi keyboard, but then have the possible issues of midi delays. So i "bit the bullet" but just on one key initially to test, I thought if it stuffed the action somehow i would then find a way of gluing it back, but as it turned out, it was fine for me. Just for info I have been into electronics since i was 10, i built a synthesizer at the age of 14 using integrated circuits via Electronic Today International magazine 4600 construction plans as i couldnt afford a minimoog at the time. So i have plenty of electronics experience.
For me it was either do the alterations or forever keep wishing the action was better, or find another midi keyboard, but then have the possible issues of midi delays. So i "bit the bullet" but just on one key initially to test, I thought if it stuffed the action somehow i would then find a way of gluing it back, but as it turned out, it was fine for me. Just for info I have been into electronics since i was 10, i built a synthesizer at the age of 14 using integrated circuits via Electronic Today International magazine 4600 construction plans as i couldnt afford a minimoog at the time. So i have plenty of electronics experience.
savont
Thanks for further information,interesting to read the details and of course reassurance that the method used was in competent hands(I had no real doubts,really…..
).
Well done,my friend.
Perhaps the "thumping" could be reduced by using different felt strips….but that's a project for future consideration,maybe…???
Anyway,time to enjoy the "new" keyboard,then….Have Fun.
Best Wishes.
Thanks for further information,interesting to read the details and of course reassurance that the method used was in competent hands(I had no real doubts,really…..
).Well done,my friend.
Perhaps the "thumping" could be reduced by using different felt strips….but that's a project for future consideration,maybe…???
Anyway,time to enjoy the "new" keyboard,then….Have Fun.
Best Wishes.
Nice job!
Good for you! Guess what?
I did something very similar. I found the action on the Kronos 2 73 to be too heavy so I took off every key and sawed off about 3-6g of metal off each one with a reciprocating saw.
I find the result to be pretty decent.
I have been thinking about one thing, though. The feel of the key hitting the bottom of its travel feels a little abrupt to me. I was wondering if putting in a different type of key felt strip might make a difference....
hmmm.....
I did something very similar. I found the action on the Kronos 2 73 to be too heavy so I took off every key and sawed off about 3-6g of metal off each one with a reciprocating saw.
I find the result to be pretty decent.
I have been thinking about one thing, though. The feel of the key hitting the bottom of its travel feels a little abrupt to me. I was wondering if putting in a different type of key felt strip might make a difference....
hmmm.....