I second that. Love it. Feels like I'm using a plug-in.vicz wrote:Works fine on a Mac, I do it all the time.
Using both Ableton Live and the Korg Editor Simultaneously
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
CharlesFerraro
- Platinum Member
- Posts: 955
- Joined: Sat Feb 06, 2010 10:15 am
- Location: California
-
winstonsmith
- Posts: 40
- Joined: Tue Dec 28, 2010 11:23 am
- Location: London
+1 for working in Cubase on PC. I only use the USB cable.
Physical Setup (midi 4x4 interface):
Keyboard to MIDI in A
USB to Radias
Nothing from MIDI out on Radias (not controlling anything yet)
Nothing to MIDI in on Radias
Editor Setup (preferences menu)
MIDI in: Radias 1 KDB/KNOB
MIDI out: RADIAS 1 SOUND
Receive Parameter Change ticked
Note MIDI in: Radias 1 MIDI in
Cubase Setup
(1)Load up a midi track
(2)Input set to MIDI A
(3)Spit out midi to the Radias on "Radias 1 Sound".
One thing in Cubase, you have to activate the midi ports in the setup, not sure if you need to do such things with Ableton.
Good luck!
Physical Setup (midi 4x4 interface):
Keyboard to MIDI in A
USB to Radias
Nothing from MIDI out on Radias (not controlling anything yet)
Nothing to MIDI in on Radias
Editor Setup (preferences menu)
MIDI in: Radias 1 KDB/KNOB
MIDI out: RADIAS 1 SOUND
Receive Parameter Change ticked
Note MIDI in: Radias 1 MIDI in
Cubase Setup
(1)Load up a midi track
(2)Input set to MIDI A
(3)Spit out midi to the Radias on "Radias 1 Sound".
One thing in Cubase, you have to activate the midi ports in the setup, not sure if you need to do such things with Ableton.
Good luck!
hi!
i think i have the same problem. I have windows 7.
I connect my KORG MICROX to ABLETON through MIDI-USB CABLE (cme u2midi), everything seems to work (except for a little latency...). When i try to open the korg editor, it doesn't work. The editor is connected to korg through usb cable (not midi).
It works only if i connect the korg to another computer. In this way i can work on ableton with one pc and with the editor on the other; without anyconflicts.
There is another way to make it work on the same computer??
i think i have the same problem. I have windows 7.
I connect my KORG MICROX to ABLETON through MIDI-USB CABLE (cme u2midi), everything seems to work (except for a little latency...). When i try to open the korg editor, it doesn't work. The editor is connected to korg through usb cable (not midi).
It works only if i connect the korg to another computer. In this way i can work on ableton with one pc and with the editor on the other; without anyconflicts.
There is another way to make it work on the same computer??
Run the UnInstDrv.exe, the Korg Midi driver uninstallation application.
Press the Option... button, then UNcheck the Delete Korg MIDI Device only checkbox and press OK.
Now remove any bad, old, unused, or non-working drivers. Be sure that the Korg driver for your keyboard is listed, or close the app and run the Install app again.
If you run the CPLRUN.EXE app, then your device must be listed when you press the "Device List..." button, or the driver has not been installed correctly.
Press the Option... button, then UNcheck the Delete Korg MIDI Device only checkbox and press OK.
Now remove any bad, old, unused, or non-working drivers. Be sure that the Korg driver for your keyboard is listed, or close the app and run the Install app again.
If you run the CPLRUN.EXE app, then your device must be listed when you press the "Device List..." button, or the driver has not been installed correctly.