Phantom power

Dcalce · Post by **Dcalce** » Sat Dec 04, 2021 6:06 pm

How can I get the phantom power to stay on after turn off and restart

Pops · Post by **Pops** » Sun Dec 05, 2021 8:36 pm

Which OS are you running on your Pa4X? If I remember correctly, Version 3.0 borked the phantom power setting, so that you always had to turn it on again after powering down the Pa4X. But, supposedly Version 3.1 corrected the issue.

taichi · Post by **taichi** » Tue Dec 07, 2021 2:13 pm

Phantom Power ALWAYS turns off after 4X shuts down. This is simply for SAFETY REASONS.

Version 3.0 knocked out Phantom Power but version 3.1 re-installed it. But that is not your problem. It turns off and stays off for SAFETY REASONS.

Good luck.

taichi · Post by **taichi** » Tue Dec 07, 2021 2:15 pm

Phantom Power ALWAYS turns off after 4X shuts down. This is simply for SAFETY REASONS.

Version 3.0 knocked out Phantom Power but version 3.1 re-installed it. But that is not your problem. It turns off and stays off for SAFETY REASONS.

Good luck.

Dcalce · Post by **Dcalce** » Tue Jan 04, 2022 5:32 pm

I’m running 3.1. And thanks for the answer. I guess it will be somethingI hav3 to do at startup.