Korg Forums

Most organ sounds switch on the leslie-effect/vibrato by pressing the keys a bit harder. Can this function been switched off ?
Thanks & sorry for my poor English.
Ricardo

Hi All,
I want to switch by the means of [SW1] either
a) Midi OFF / Int of a channel
or
b) mute of a channel (or sound)
Is that possible ?

Thanks for a good idea :-)

Regards
Ric

That´s what I feared

Thanks anyway for taking the time

Regards
Ric

Hi Antony,
Thanks for your reply
1) when booting the screen remains dark
2) when holding intro-1 button down while pressing st-by, also black screen (st-by LED green, after 2-3 seconds starts blinking)

Regards
Ric

Hi all, I´ve got a problem with starting up the PA3X. After switching on the hardware switch the standby LED at first gleams red and starts to blink after 4-5 seconds (this stage is kept). When pressing the standby button the LED changes to green and starts to blink green few seconds later, however ...

Bill, Thanks for your reply. Is there a possibility to switch off the global channel or supress the transmitting ? The split range of the TR is set correctly, i.e. no overlap. However it uses the whole keyboard (76 keys) Might that help to shrink the split range to e.g. 1 octave each section to try ...

plj667 & billbaker, I had a look in your conversation, and think you maybe could help me to fix a problem. I connected a Roland VK-8m to my TR76, expecting that upper and lower manual could be controlled by the means of a combi. The setting of the VK is CH3 lower and CH1 upper. The combi splits the ...

Hi All, I´m still having the problem how to operate an organ module with the TR. I simply want to split the TR keyboard into two halfes and control the lower and upper manual section of the module with the left and right half respectively. I tried it with the combi mode, but had no success as the ...

Hi All, I´ve got a weird problem. The TR is connected to an external organ module. The TR keyboard is split and assigned to the upper/lower keys of the module via midi channel 1 and 3. The crazy thing is : Only the upper keys of the module are controlled by the TR, independent of the assignment of ...

Hi All,

How can I send out cc#80 from the TR to an other midi device using a foot switch connected to the TR ?

Thanks for your support !

Regards
Ricardo

Hi All,

The sounds of the program banks have arpeggiator or IFX settings which are not provided when a sound is used in the sequencer mode.
Is there a possibility to "copy" those settings ?

Thanks
Ricardo

Hi Sharp,

After some trying in the global mode I made it.
Thanks.

Regards
Ric

Sharp,

Yes, I´ve tried out various things in various menues.
The main problem is that the settings always affect all keys.
What I´m looking for is a setting which can be applied to a certain key (in this regard the key with the snare sound).

Regards
Ric

Hi All,
All snare drums of my TR76 sound very hard, even at low key velocity.
Especially a swing jazz snare should sound smoothly at lowest and similar to a rim shot at highest velocity.
Does anyone know a possibility to adjust that ?

Thanks a lot !

Ricardo

Thanks X-Trade,
I found it. It´s in the annex of the operation manual.
The CC list is unclear in some regards, but I´ll simply try it out.
Regards
Ric