View previous topic :: View next topic |
Author |
Message |
losackmd2 Full Member
Joined: 13 May 2012 Posts: 125
|
Posted: Wed Mar 13, 2013 11:06 pm Post subject: Microphone audio in is broken and needs a new part Pa3x61 |
|
|
Bought the unit 10 months ago. Love the mic/Helicon feature.
too much perhaps. I take such good care of my equipment.
used it everyday. One day recently i hit the MIC button and no sound.
The audio in light will not turn green. Tried everything. Brought it in for repair. Needs a new part. Korg doesnt have the part listed. The wait is terrifying. I'm afraid it could take 4-6 weeks.
Have any of you had a problem with the mic in/volume control?
I have never owned a musical instrument that needed repair.
Im talking 27 years. Ensoniq, Roland, Casio, never!
Is Korgs Pa3x a fragile unit? any thoughts or experience on this issue.
I realize life isnt perfect but maybe i am not the only one whose mic input
broke! or am i !
thanks
gl |
|
Back to top |
|
|
losackmd2 Full Member
Joined: 13 May 2012 Posts: 125
|
Posted: Fri Mar 15, 2013 3:58 pm Post subject: from KORG and ROGUE where i bought it |
|
|
this is a new machine acc to them??????????
the part POT0010001 is new and they dont know if its available
nor how long it will take to ship
an air of extreme indifference
i take it all of your mics work fine
ROgue says they never encountered a problem like this before
i think ive exhausted all possibilities
except continuing to annoy them for the part
or get a refund.................. |
|
Back to top |
|
|
michagi Junior Member
Joined: 09 Jul 2012 Posts: 61 Location: Poland
|
Posted: Fri Mar 15, 2013 7:59 pm Post subject: Re: Microphone audio in is broken and needs a new part Pa3x |
|
|
Hi,
losackmd2 wrote: | One day recently i hit the MIC button and no sound.
The audio in light will not turn green.
|
Was the MIC switch checked properly?
Sometimes those micro-switches get broke, or their connectors lose contact with the PCB.
If this is the case you might find someone to replace just the switch, or solder it properly.
This would be a matter of hours and not weeks.
I hope you will have your Pa3x fixed soon.
Michal |
|
Back to top |
|
|
losackmd2 Full Member
Joined: 13 May 2012 Posts: 125
|
Posted: Sun Mar 17, 2013 12:07 am Post subject: Rogue in MANHATTAN music came through |
|
|
Sent from my iPod
ROGUE are the best
gave me a brand new machine today
mic audio in light is on
not a fingerprint on it
it came with serial number in the 7 thousand range ( last 4 digits) so i dont need to replace the battery.
OS 1.11
can i upgrade to 1.6 directly
i have to also upgrade the resources too right?
thanks
very much |
|
Back to top |
|
|
JayLou Junior Member
Joined: 21 Mar 2011 Posts: 50
|
Posted: Fri Feb 14, 2020 2:24 am Post subject: |
|
|
I have the same problem. Mic just stops working. I had never touched the knob in the back of the keyboard for years but was trying to alleviate feedback and distortion. A couple weeks after messing with the volume knob on the back of the unit the mic just stops working. Also seem to be getting low level shock from the unit / mic. |
|
Back to top |
|
|
JayLou Junior Member
Joined: 21 Mar 2011 Posts: 50
|
Posted: Wed Apr 22, 2020 12:00 pm Post subject: |
|
|
Read in a post that the volume nob at the back of the keyboard could be the issue. The part was around 6 dollars US plus shipping cost was about 15 Canadian. Potentiometer, for PA3X Mic In (Part #1399) I held onto the part while I tried different things. Unplugging and plugging back in seemed to work but then would drop out again. Using phantom power with condenser mic seemed to work but the problem would return. Reloaded all software didn't fix the issue. Tried all the mic settings as well. Found a guy on line would advertised micro soldering. I removed the board and took it to him. Had it soldered for 25$. Costed me 50$ and problem is now resolved.
here the web page where you can order the part
https://syntaur.com/korg_pa.html
Thank you Duby2 |
|
Back to top |
|
|
|