|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
dtray187 Junior Member
Joined: 09 Apr 2010 Posts: 62
|
Posted: Mon Jun 13, 2011 1:41 am Post subject: Help editing program layers.... |
|
|
On the programs page I selected a brass patch.
Then on osc1/basic page I added mutisamples to the program (extra brass waveforms)
But I cant hear them.
The levels are 127, still nothing.
What am I doing wrong?
Thanks |
|
Back to top |
|
|
jahrome Senior Member
Joined: 14 Jan 2011 Posts: 378 Location: Tokyo, Japan
|
Posted: Mon Jun 13, 2011 2:53 am Post subject: Re: Help editing program layers.... |
|
|
dtray187 wrote: | On the programs page I selected a brass patch.
Then on osc1/basic page I added mutisamples to the program (extra brass waveforms)
But I cant hear them.
The levels are 127, still nothing.
What am I doing wrong?
Thanks |
Are the multisamples loaded? Also, how many layers (within the OSC1) do you have? _________________ Tool box: Kronos 61, Fantom FA06, ASR-10, MPCX, MPC Live, and MPC 4000. |
|
Back to top |
|
|
dtray187 Junior Member
Joined: 09 Apr 2010 Posts: 62
|
Posted: Mon Jun 13, 2011 2:57 am Post subject: |
|
|
They are just korg multisamples from the internal rom, just trying to make the sounds fuller |
|
Back to top |
|
|
Shakil Platinum Member
Joined: 08 Jan 2002 Posts: 1169 Location: New Jersey, USA
|
Posted: Mon Jun 13, 2011 3:47 am Post subject: |
|
|
you can't layer multisample within same OSC... you have to use OSC2.... Within a single OSC, you only velocity swith among multisamples.. _________________ Roland Fantom-G6 ARX1, Korg M3-m exb-Radias, Korg Z1-18v, Roland MC-808, Roland MC-909, Korg microKontrol. |
|
Back to top |
|
|
jahrome Senior Member
Joined: 14 Jan 2011 Posts: 378 Location: Tokyo, Japan
|
Posted: Mon Jun 13, 2011 4:21 am Post subject: |
|
|
Shakil...you are almost correct.
I am just getting familiar with the way Korg programs are created. I had a similar issue as dtray187. The OSC1 page has 8 slots. I used four of the slots by adding a sample to each. But Kronos will not allow you to layer 4 samples assigned to the same range. You can only layer up to 2.
So what I did was set MS1 to XFade range=127 and Curve=Layer. Then I added a sample to MS2. These settings allow me to lawyer two multisamples. In the OSC window, you will see two bars...one green and one blue which is a representation of the layers.
I honestly find this way more difficult than it needs to be. It should be as simple as assigning 1 to 8 MS (multisamples) to an OSC, and setting the velocity and key range. _________________ Tool box: Kronos 61, Fantom FA06, ASR-10, MPCX, MPC Live, and MPC 4000. |
|
Back to top |
|
|
dtray187 Junior Member
Joined: 09 Apr 2010 Posts: 62
|
Posted: Mon Jun 13, 2011 12:03 pm Post subject: |
|
|
So let me get this straight...
If I started from scratch and wanted to make a brass patch, using both osc 1-2.
there are 8 slots on each in the window.
How many slots on 1 and 2 can I actually use to stacks sounds?
I know on motif xs there are 8 elements per patch.
Can I get up to 8 between both osc's? |
|
Back to top |
|
|
jahrome Senior Member
Joined: 14 Jan 2011 Posts: 378 Location: Tokyo, Japan
|
Posted: Mon Jun 13, 2011 12:48 pm Post subject: |
|
|
dtray187 wrote: | So let me get this straight...
If I started from scratch and wanted to make a brass patch, using both osc 1-2.
there are 8 slots on each in the window.
How many slots on 1 and 2 can I actually use to stacks sounds?
I know on motif xs there are 8 elements per patch.
Can I get up to 8 between both osc's? |
The key word is 8 "velocity zones." You can assign 8 multisamples to the 8 velocity zones; but no more than 2 zones will playback when you strike a key. Kronos OS is designed more for velocity switching with smooth transitions between each velocity zone; not for stacking 8 (or 16) sounds to be triggered on one key.
Using both OSC 1 & 2, you can trigger 4 sounds (multisamples) with a single key.
I hope I explained it clear enough. _________________ Tool box: Kronos 61, Fantom FA06, ASR-10, MPCX, MPC Live, and MPC 4000. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|