Korg Forums

taurgo Production · Joined: 04 Jun 2011 Posts: 31 Location: Michigan

can someone please tell why in PROG mode in the main play part when i click on the piano, to the right you will see a setup page then under that you will see a components page. now when you are in the component page everything is in red nothing works . the same goes for setup page the only thing thats in the black is the volume, pan, octave and transpose. i can't here the piano lid position effect release time, velocity time, velocity bias, or velocity intensity. iThe stereo perspective: Player is red also.

Did i load up the right sound in the hard drive or what?

When i went on Korg us web site i watched the SG1 video and his was working fine and they was all green not red like mine
_________________
Korg Kronos, Mashine, Motif XF, Fantom X

MartinHines · Posted: Sat Jun 11, 2011 11:16 am Post subject:

Removed due to incorrect info.
_________________
** KORG Product Support Contacts **
(they support BOTH hardware and software)

Korg USA Product support -- https://www.korgusa.com/contactus (For fastest service I would suggest calling them on the phone)

Outside the U.S. contact your Korg Country Distributor -- https://www.korg.com/us/corporate/distributors/

danatkorg · Posted: Sat Jun 11, 2011 5:41 pm Post subject:

Parameters in red are assigned to tone adjust controls.
They will all still allow editing as normal, however. Try them!

- Dan
_________________
Dan Phillips
Manager of Product Development, Korg R&D
Personal website: www.danphillips.com
For technical support, please contact your Korg Distributor: http://www.korg.co.jp/English/Distributors/
Regretfully, I cannot offer technical support directly.
If you need to contact me for purposes other than technical support, please do not send PMs; instead, send email to dan@korgrd.com

taurgo Production · Joined: 04 Jun 2011 Posts: 31 Location: Michigan

what is tone adjust controls? and can i work them?
_________________
Korg Kronos, Mashine, Motif XF, Fantom X

cello · Posted: Sat Jun 11, 2011 6:18 pm Post subject:

Down on the bottom left of the control surface (where all the manual buttons are), there's a Tone Adjust button.

Press it.

You can now use the sliders to adjust the 'tone' or program.
_________________
Plugged in: Fantom 8, Jupiter-X, Jupiter 80, System-8, JD-XA, V-Synth GTv2, FA-06, SE-02, JU-06A, TR-09, VT-4, Go:Livecast, Rubix44, Shure SM7b, Push2, Ableton 11 Suite, Sibelius, KRK Rokit 5,

taurgo Production · Joined: 04 Jun 2011 Posts: 31 Location: Michigan

you can go there and see my problem.

http://www.youtube.com/watch?v=GDBtOini9k4
_________________
Korg Kronos, Mashine, Motif XF, Fantom X

MartinHines · Posted: Sat Jun 11, 2011 7:23 pm Post subject:

I would suggest the following:
1) Go through the Easy Start Guide

2) Start reading the Operation Guide, reading 10 pages a day. Go through the entire book and you will be very comfortable using the Kronos.
_________________
** KORG Product Support Contacts **
(they support BOTH hardware and software)

Korg USA Product support -- https://www.korgusa.com/contactus (For fastest service I would suggest calling them on the phone)

Outside the U.S. contact your Korg Country Distributor -- https://www.korg.com/us/corporate/distributors/

Kevin Nolan · Posted: Sat Jun 11, 2011 7:32 pm Post subject:

OASYS owner here and don't own a Kronos yet - Dan - that sound's like an excellent new feature. To know what's assigned to Tone Adjust - very nice and _very_ useful.

Kevin.

danatkorg · Posted: Sat Jun 11, 2011 7:57 pm Post subject:

danatkorg · Posted: Sat Jun 11, 2011 8:07 pm Post subject: