View previous topic :: View next topic |
Author |
Message |
brickboo
Joined: 21 Mar 2006 Posts: 15
|
Posted: Sat Feb 14, 2009 3:05 am Post subject: Button problem |
|
|
On my i30 the variation 4 button pushed in. Can someone advise me as to where I can acquire the necessary parts to fix it?
A friend on another forum that use to fix organs and keyboards is convinced that I can fix it my self. He's about talked me into trying.
I can't pay someone hyndreds of dollars to fix it right now.
Thanks a bunch for all of the help,
Boo Hargis _________________ Boo Hargis |
|
Back to top |
|
|
milo Full Member
Joined: 30 Aug 2008 Posts: 157 Location: Netherlands
|
Posted: Sat Feb 14, 2009 12:31 pm Post subject: |
|
|
hi,
Does the button still works? Have your i30 fallen down? What is the cause of the pushed button? _________________ Pa1xPro! SurYoYo MusIc! |
|
Back to top |
|
|
brickboo
Joined: 21 Mar 2006 Posts: 15
|
Posted: Sun Feb 15, 2009 2:00 am Post subject: |
|
|
I just pushed the variation 4 button while playing live as I usually do and it just fell into the keyboard. I can see it. It's just about a half of an inch down inside the keyboard, but it's loose and just sitting there.
Thanks again for any help,
Boo Hargis _________________ Boo Hargis |
|
Back to top |
|
|
milo Full Member
Joined: 30 Aug 2008 Posts: 157 Location: Netherlands
|
Posted: Thu Feb 26, 2009 2:35 pm Post subject: |
|
|
hi,
srry for the late response.
I got on my xpro also 1 button that is a bit loose, but it is still working very good. I just let it, because it works still.
It is probably a little plastic thing under the button that is broken.
However i asked about fixing it. Some can do it by there own, and some just take it to the dealer. But i wouldn´t take the risk to make it by your own, because you have to take a lot of technical stuff loose to come by the button.
So if it still works, i recommend you just to leave it so. And a tip: Try to strike the buttons on the top and don't press to hard on it. Just a strike..
Byee _________________ Pa1xPro! SurYoYo MusIc! |
|
Back to top |
|
|
Douglas
Joined: 05 Mar 2009 Posts: 13 Location: China
|
Posted: Thu Mar 05, 2009 12:42 pm Post subject: |
|
|
milo wrote: | hi,
srry for the late response.
I got on my xpro also 1 button that is a bit loose, but it is still working very good. I just let it, because it works still.
It is probably a little plastic thing under the button that is broken.
However i asked about fixing it. Some can do it by there own, and some just take it to the dealer. But i wouldn´t take the risk to make it by your own, because you have to take a lot of technical stuff loose to come by the button.
So if it still works, i recommend you just to leave it so. And a tip: Try to strike the buttons on the top and don't press to hard on it. Just a strike..
Byee |
yes ,just leave it so.
maybe there's a big problem when disassemble it. |
|
Back to top |
|
|
|