View previous topic :: View next topic |
Author |
Message |
Lins
Joined: 16 Jan 2009 Posts: 6
|
Posted: Fri Jan 16, 2009 12:52 am Post subject: N364 Sequencer: Track number sticks - what's wrong? |
|
|
On my N364 sequencer display the Track number sticks. The slider and up/down keys work on everything else, but the Track number stubbornly refuses to move. I switch off/on and it may (or may not) work.
Frustrating!!!
Any suggestions? |
|
Back to top |
|
|
Sharp Site Admin
Joined: 02 Jan 2002 Posts: 18197 Location: Ireland
|
Posted: Fri Jan 16, 2009 11:48 am Post subject: |
|
|
The likely cause is that your using a Damper Pedal made by someone other than KORG.
Regards.
Sharp. _________________
|
|
Back to top |
|
|
Lins
Joined: 16 Jan 2009 Posts: 6
|
Posted: Sat Jan 17, 2009 2:55 am Post subject: |
|
|
Sharp wrote: | The likely cause is that your using a Damper Pedal made by someone other than KORG.
Regards.
Sharp. |
Thanks Sharp.
I have a Korg damper pedal, but I haven't used it for a long time.
I have used a non-Korg volume pedal but I have the assignable pedal set "off" - could this cause my problem?
Anything else you can suggest? |
|
Back to top |
|
|
Sharp Site Admin
Joined: 02 Jan 2002 Posts: 18197 Location: Ireland
|
Posted: Sat Jan 17, 2009 3:58 pm Post subject: |
|
|
Nope, it can only be related to you using the wrong damper pedal, or if your not using any and you have the polarity set to use a non KORG pedal.
So try reverse the polarity back to the normal KORG format.
Regards.
Sharp. _________________
|
|
Back to top |
|
|
Lins
Joined: 16 Jan 2009 Posts: 6
|
Posted: Tue Jan 20, 2009 1:10 am Post subject: |
|
|
I played with the pedal polarity some more and it seems to be working - I guess you're right, Sharp. Thanks. |
|
Back to top |
|
|
Sharp Site Admin
Joined: 02 Jan 2002 Posts: 18197 Location: Ireland
|
Posted: Tue Jan 20, 2009 1:22 am Post subject: |
|
|
Glad to hear it.
Regards.
Sharp. _________________
|
|
Back to top |
|
|
|