Korg Forums

CyberDiablo · Joined: 01 Oct 2007 Posts: 6 Location: Montreal, Canada

Hi all,
I know the topic has already been covered on the forum but I can't seem to find someone that can confirm it. Is the sound editing software for the X50 usable with the TR? I'm thinking since they have exactly the same engine and the same sounds it should obviously work. Did someone manage to get that to work?
I know about the one from SoundTower but i would prefer getting one for free.

Thanks.

klarnet basowy · Posted: Mon Oct 08, 2007 5:33 pm Post subject:

good idea, Very Happy

well.. try it! I'm downloading now and see if it work with the TR61
_________________
Kurzweil PC361
... and no Korg keybs now, we'll se in the future...
http://www.myspace.com/neogeo

muLperi · Junior Member Joined: 04 Jun 2007 Posts: 57

let us all know then

klarnet basowy · Posted: Tue Oct 09, 2007 8:12 am Post subject:

michelet · Posted: Tue Oct 09, 2007 1:09 pm Post subject:

Unfortuanately I have to give you bad news.

Although Korg x-50 and TR series have the same engine, X-50 editor won't work with the TR.

The instrument is perfectly recognized by Digital Performer 5 both via USB and MIDI, but once X-50 editor is loaded, there's no way to put software and hardware into communication.
X-50 editor doesn't recognize TR series instruments.

I suspect it's only a matter of instrument ID # difference.
As far as I know the sys-ex strings are absolutely the SAME.
_________________
Life without music would be a mistake

CyberDiablo · Joined: 01 Oct 2007 Posts: 6 Location: Montreal, Canada

I tried yesterday but as michelet says, the X50 editor software dosen't seem to be able to "see" the TR even if Windows sees it through the USB port.
Does somebody know if it is possible to tweak the instrument ID # either on the keyboard or in the X50 editor software?

klarnet basowy · Posted: Tue Oct 09, 2007 3:59 pm Post subject:

Couto · Joined: 24 Apr 2007 Posts: 25 Location: Brazil, Londrina/PR

michelet · Posted: Mon Oct 15, 2007 9:03 am Post subject: