|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
mozartella Senior Member
Joined: 23 Nov 2003 Posts: 341 Location: Budapest Hungary
|
Posted: Thu Oct 04, 2007 9:37 pm Post subject: another bug v 1.3 |
|
|
for me, since I installed the new v 1.3, 24 hours ago, I had to shut down the Oasys 3 times, because, when playing the Mod timbres, for no reason, when I try to change patche or timbre, suddenly the machine stop ..Nothing is working anymore, like screen, buttons, and seems related with the use of the MOD patches... I recall also having used toonight some IFX, but not yesterday ?
I am not able yet, to locate the trouble, but I never encounter something similare with the previous version... I did not notice trouble with others ( old) patches or timbre.....
Now, I would like to goes back to previous version, can I ?
thanks
when I installed the new OS, I used a blank CD-RW, and the software indicated by Korg for burning it... could it be the trouble? _________________ Oasys 76, serial 000800 and Korg PA1 X PRO |
|
Back to top |
|
|
danatkorg Product Manager, Korg R&D
Joined: 21 Jan 2005 Posts: 4204 Location: California, USA
|
Posted: Thu Oct 04, 2007 11:03 pm Post subject: Re: another bug v 1.3 |
|
|
mozartella wrote: | for me, since I installed the new v 1.3, 24 hours ago, I had to shut down the Oasys 3 times, because, when playing the Mod timbres, for no reason, when I try to change patche or timbre, suddenly the machine stop ..Nothing is working anymore, like screen, buttons, and seems related with the use of the MOD patches...? |
How are you changing the Programs? Is it possible that this is related to the problem with cancelling from the popup, as reported by paulifra in this thread:
http://www.korgforums.com/forum/phpBB2/viewtopic.php?t=28301
Have you loaded the new MOD-7.KGE?
Can you name any of the Programs that you were trying to select?
Thanks for your help.
Best regards,
Dan _________________ Dan Phillips
Manager of Product Development, Korg R&D
Personal website: www.danphillips.com
For technical support, please contact your Korg Distributor: http://www.korg.co.jp/English/Distributors/
Regretfully, I cannot offer technical support directly.
If you need to contact me for purposes other than technical support, please do not send PMs; instead, send email to dan@korgrd.com |
|
Back to top |
|
|
mozartella Senior Member
Joined: 23 Nov 2003 Posts: 341 Location: Budapest Hungary
|
Posted: Fri Oct 05, 2007 11:09 am Post subject: Re: another bug v 1.3 |
|
|
danatkorg wrote: | mozartella wrote: | for me, since I installed the new v 1.3, 24 hours ago, I had to shut down the Oasys 3 times, because, when playing the Mod timbres, for no reason, when I try to change patche or timbre, suddenly the machine stop ..Nothing is working anymore, like screen, buttons, and seems related with the use of the MOD patches...? |
How are you changing the Programs? Is it possible that this is related to the problem with cancelling from the popup, as reported by paulifra in this thread:
http://www.korgforums.com/forum/phpBB2/viewtopic.php?t=28301
Have you loaded the new MOD-7.KGE?
Can you name any of the Programs that you were trying to select?
Thanks for your help.
Best regards,
Dan |
Dan thanks for the help, yes I did loaded the MOD7.KGE, or ? do we have to load it each time?
no, to my recaal I did not use the Cancel button, sorry no time but later going to lock at it closer....But? do I go back to previous version? _________________ Oasys 76, serial 000800 and Korg PA1 X PRO |
|
Back to top |
|
|
mozartella Senior Member
Joined: 23 Nov 2003 Posts: 341 Location: Budapest Hungary
|
Posted: Fri Oct 05, 2007 11:15 am Post subject: |
|
|
one thing I can recall for sure, I was only in Program mode, NOT on Combi mode _________________ Oasys 76, serial 000800 and Korg PA1 X PRO |
|
Back to top |
|
|
Drew FM Platinum Member
Joined: 14 Oct 2003 Posts: 515 Location: Fenton, MI U.S.A
|
Posted: Fri Oct 05, 2007 12:52 pm Post subject: |
|
|
I will say this. The only time I ever had a problem updating my Oasys was when I went from 1.20 to 1.23. That burning software that Korg directs you to has a burn speed option and you need to set this at a slower speed, depending on your drive itself and the quality of the media you are using. I would recommend to anyone burning a O.S. update to set the burn speed at it's slowest setting, and use verify option. Just be patient. This suggestion not only applies to the software Korg mentions, but I assume this would be the best pratice with any software you might be using. _________________ Create to enjoy, not to destroy |
|
Back to top |
|
|
mozartella Senior Member
Joined: 23 Nov 2003 Posts: 341 Location: Budapest Hungary
|
Posted: Fri Oct 05, 2007 3:49 pm Post subject: |
|
|
Drew FM wrote: | I will say this. The only time I ever had a problem updating my Oasys was when I went from 1.20 to 1.23. That burning software that Korg directs you to has a burn speed option and you need to set this at a slower speed, depending on your drive itself and the quality of the media you are using. I would recommend to anyone burning a O.S. update to set the burn speed at it's slowest setting, and use verify option. Just be patient. This suggestion not only applies to the software Korg mentions, but I assume this would be the best pratice with any software you might be using. |
thanks for the tip, but, for a long time, when burning I always choose a very slow speed, like 4 X _________________ Oasys 76, serial 000800 and Korg PA1 X PRO |
|
Back to top |
|
|
mdh Junior Member
Joined: 05 Oct 2007 Posts: 76
|
Posted: Mon Oct 08, 2007 3:33 am Post subject: Re: another bug v 1.3 |
|
|
danatkorg wrote: |
How are you changing the Programs? Is it possible that this is related to the problem with cancelling from the popup, as reported by paulifra in this thread:
|
Hi Dan,
I had mine lock up similarly once also. I don't have any MIDI stuff attached yet (I have a Edirol UA25 currently plugged into my Boss GT-
I will try to reproduce.
What I do recall is that the touchscreen as well as the mode, utility and bank select buttons were all dead. The tempo knob functioned fine. I can't recall for the sliders or knobs on the LHS but the buttons except for the KARMA on/off button were also dead.
Wait, its coming back to me, the sliders were fine and I was attempting to discover why my layering on a custom combo I made was causing the polyphony to be 4 keys. I was most likely flicking through every page on the touchscreen. It was stuck on the bank/combination select screen.
My custom combi I made with OS 1.2.3 - it only has the ROM voices.
Int A000, Int C035, IntF001, UsrA000, UsrA001, IntA008, IntC009, IntB090, IntF084 (the rest are defaulted to IntA000 and are muted)
I'm running OS 1.3 and have the preload, lac-1 and mod-7 files fully loaded. |
|
Back to top |
|
|
danatkorg Product Manager, Korg R&D
Joined: 21 Jan 2005 Posts: 4204 Location: California, USA
|
Posted: Mon Oct 08, 2007 6:23 am Post subject: Re: another bug v 1.3 |
|
|
mdh wrote: | danatkorg wrote: |
How are you changing the Programs? Is it possible that this is related to the problem with cancelling from the popup, as reported by paulifra in this thread:
|
Hi Dan,
I had mine lock up similarly once also. |
Thanks for the detailed info!
- Dan _________________ Dan Phillips
Manager of Product Development, Korg R&D
Personal website: www.danphillips.com
For technical support, please contact your Korg Distributor: http://www.korg.co.jp/English/Distributors/
Regretfully, I cannot offer technical support directly.
If you need to contact me for purposes other than technical support, please do not send PMs; instead, send email to dan@korgrd.com |
|
Back to top |
|
|
mozartella Senior Member
Joined: 23 Nov 2003 Posts: 341 Location: Budapest Hungary
|
Posted: Mon Oct 08, 2007 11:06 am Post subject: |
|
|
yesterday, I had some times with the O, and, I did played about an hour, try that and this, and what not able to replicate the troubles..I was mainly in Program, mode, but, I know for sure, I did NOT pluged my USB key...wondering _________________ Oasys 76, serial 000800 and Korg PA1 X PRO |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|