Korg Forums

groovesection · Joined: 08 Sep 2007 Posts: 8 Location: cali orange county

ok has anyone had this problem? why does notes sound like the sustain is on and there is no midi or sustain pedal hooked up......right when i power the unit up and i play a note and it stays on>>>>

Sharp · Posted: Sun Sep 09, 2007 12:59 am Post subject:

A very long shot, but you should consider erasing the memory.

1: If you do not have the factory disks, download a copy off the official KORG website, and place them on floppy disks.

2: Save the contents of your Triton to a floppy disk. Bearing in mind that this data might be the cause of your problem, you may not get to use this disk later.

3: Turn off your Triton.

4: Press and hold down the Enter and 0 buttons.

5: Turn on the power.

6: After 5 seconds, let go of the Enter and 0 buttons.

7: Insert the factory disk, and load the PCG file.

8: Now check to see if your Triton is preforming correctly.

If it is... excellent, you can try loading the backup copy of the Triton you saved to disk now. And as I mentioned, this could be the cause of the problem, so, you may not be successful here.

Or... none of this will work at all and you have a mechanical fault.

Regards.
Sharp.
_________________