Korg Forums

[alphat]

Hi,

I've managed to loose the screws for my stand

Korg SPST-1W SP170s Digital Piano stand

Can anyone give me the dimensions and the types of these screws?


Thanks for the help.

[voip]

If there is a decent hardware store near you, they might be willing to help find the correct screws. It might be worth going to the store and taking the two middle bars from the stand with you, together with a printed copy of the SPST-1W assembly instructions, and an image of the screw kit from the Parts Is Parts website.

Links below:

https://www.korg.com/us/support/download/manual/0/236/1882/

https://www.partsisparts.net/catalog/korg-screw-set-sp170s-510640520702

https://www.partsisparts.net/sites/default/files/styles/uc_product_full/public/510640520702.jpg?itok=tNSzAqs1

At a guess, the four wing screws look as if they have M5 threads, and the four longer machine screws are likely to have M6 threads. The store might allow you to try screws with different sized screw threads into the holes in the middle bars, to see which sizes gives the best fit.

If the holes for the wing screws turn out to have an M5 thread then, looking at the image from the Parts Is Parts website, and scaling it, the length of the screw will be 10mm (the length of the screw is about twice the thread diameter).

If the holes for the machine screws turn out to have M6 threads then, based on the image, the length of the screw is likely to be 25 or 30mm.

.

[alphat]

Thanks for your reply.

I think i will do that.

There is a music store nearby.
I will try asking there before. Maybe i will be lucky.

Ortherwise your solution seems the best.

[alphat]

Final update.

I contacted Korg support.

They gave a me a link to a merchant

https://www.algam-webstore.fr/korg-kit-visserie-noir-sp170-153899.html

I was able to order from it.

Exactly what i needed.

[voip]

Glad you were able to solve it :-)

.