|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
danatkorg Product Manager, Korg R&D
Joined: 21 Jan 2005 Posts: 4204 Location: California, USA
|
Posted: Sun Apr 03, 2022 5:19 am Post subject: |
|
|
snugsound wrote: | I'm running into the same issue here. Unfortunately, when I try to put the WS into USB boot mode, the updater can't find the device. I also see this in device manager, which looks a bit suspect:
Has anyone else encountered this? |
That's what the raspberry pi looks like in USB Boot Mode on Windows, so that's correct as it goes. On Windows, you will probably need to download the driver (not necessary on macOS); this is a good source: https://www.raspberrypi.com/documentation/computers/compute-module.html
Use Restore Boot Partition from the 2.0.1 Windows installer (not 2.1.0), and then just install 2.1.0 normally. _________________ Dan Phillips
Manager of Product Development, Korg R&D
Personal website: www.danphillips.com
For technical support, please contact your Korg Distributor: http://www.korg.co.jp/English/Distributors/
Regretfully, I cannot offer technical support directly.
If you need to contact me for purposes other than technical support, please do not send PMs; instead, send email to dan@korgrd.com |
|
Back to top |
|
|
snugsound
Joined: 02 Apr 2022 Posts: 4
|
Posted: Sun Apr 03, 2022 10:01 pm Post subject: |
|
|
danatkorg wrote: | That's what the raspberry pi looks like in USB Boot Mode on Windows, so that's correct as it goes. On Windows, you will probably need to download the driver (not necessary on macOS); this is a good source: https://www.raspberrypi.com/documentation/computers/compute-module.html
Use Restore Boot Partition from the 2.0.1 Windows installer (not 2.1.0), and then just install 2.1.0 normally. |
That did the trick, thanks! |
|
Back to top |
|
|
levi909
Joined: 26 May 2022 Posts: 1
|
Posted: Thu May 26, 2022 12:09 am Post subject: |
|
|
danatkorg wrote: | snugsound wrote: | I'm running into the same issue here. Unfortunately, when I try to put the WS into USB boot mode, the updater can't find the device. I also see this in device manager, which looks a bit suspect:
Has anyone else encountered this? |
That's what the raspberry pi looks like in USB Boot Mode on Windows, so that's correct as it goes. On Windows, you will probably need to download the driver (not necessary on macOS); this is a good source: https://www.raspberrypi.com/documentation/computers/compute-module.html
Use Restore Boot Partition from the 2.0.1 Windows installer (not 2.1.0), and then just install 2.1.0 normally. |
I think I'm having the same issue as snugsound was, but I can't find any driver on the page linked above so I'm not sure how to resolve the issue? Am I missing something on that page? |
|
Back to top |
|
|
Montyboy
Joined: 24 Jul 2022 Posts: 1 Location: Melbourne, Australia
|
Posted: Sun Jul 24, 2022 1:49 pm Post subject: |
|
|
Hi guys. New to the forum & trying to solve the same issue with the Wavestate update. This one is the 2nd of two Wavestates I have just bought (used). I successfully updated one of them from 2.01 to 2.10. Windows 10.
The 2nd one is running 2.0. I cannot get any one of 4 computers (all Windows) to recognize this Wavestate in RNDIS & the driver will not update. It sees it in NCM but running the update produces the message "Version mismatch after installation" as others have cited here. I tried 1.06 & 2.01. No good.
I've attempted to do in Boot Mode & its not recognized in that either. I can see the boot in Device Manager but it had the dreaded yellow triangle (as did the RNDIS). Exploring Dan's link in the post for the boot driver came up with nothing.
Lost hours on this trying every conceivable variation. No cigar. I have followed correct procedure to the letter. Getting desperate. Did any of you in this post end up solving it please.
Many thanks |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|