Korg Forums

[CSURIEUX]

EDIT : I found a temporary fix removing the IP V6 from the temporary connection created fot thernet over USB, only V4.
EDIT 2 : Not perfect, I play on WS keyboard and the connection breaks...
EDIT 3 : I reverted to initial IP settings, still the pb, next option could be last W10 update ?????
EDIT 4 : It could be the power station used, bought on Amazon to have a second playing place. With the original no disconnctions...

On Windows 10, last version from this morning, last Editor 2.01;
I start the Wavestate editor, it connects and after some work, 2 to 5 minutes, I am loosing the connection with Wavestate.
Then impossible to reconnect.
If I open the Windows Eventwiever, I have several errors, the main being this one :
"The local adapter does not support a Low Energy controller state important for peripheral mode support. Minimum required supported status mask is 0x2491f7fffff, received 0x1fffffff. The functionality of the Low Energy peripheral role will not be available."
Could it be the last Windows update which broke process for Editor ?
Her is the details
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="BTHUSB" />
<EventID Qualifiers="32773">34</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2022-02-16T15:45:16.4639108Z" />
<EventRecordID>130676</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="12600" />
<Channel>System</Channel>
<Computer>Spectre</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>0x2491f7fffff</Data>
<Data>0x1fffffff</Data>
<Binary>00000000030028000000000022000580000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>

then I also noticed this

"Client application bug: DNSServiceResolve(Korg\032wavestate\0321._korg-synth._tcp.local.) active for over two minutes. This places considerable burden on the network."

Just before there is an error stating that it was impossible to get a DHCP address for network :
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Dhcp-Client" Guid="{15a7a4f8-0072-4eab-abad-f98a4d666aed}" />
<EventID>1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>75</Opcode>
<Keywords>0x4000000000000001</Keywords>
<TimeCreated SystemTime="2022-02-16T15:03:50.7591990Z" />
<EventRecordID>6923</EventRecordID>
<Correlation />
<Execution ProcessID="1796" ThreadID="5964" />
<Channel>Microsoft-Windows-Dhcp-Client/Admin</Channel>
<Computer>Spectre</Computer>
<Security UserID="S-1-5-19" />
</System>
- <EventData>
<Data Name="HWLength">6</Data>
<Data Name="HWAddress">000000000000</Data>
<Data Name="StatusCode">121</Data>
</EventData>
</Event>


I have not used the editor before, just installing and starting, but now I need it and it is impossible to use it more than duplicating a perf...

I checked the USB cable, changed it. I cleaned the Device manager. No solution.

Any solution for this annoying situation ?