|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
jb58
Joined: 05 May 2021 Posts: 31
|
Posted: Wed Nov 03, 2021 2:20 pm Post subject: Windows 11 - still no joy |
|
|
Hi,
Just to report: today I have upgraded my Pc to Windows 11 - still no connection to my Wavestate. Maybe someone else had more luck ? |
|
Back to top |
|
|
drdave2002 Junior Member
Joined: 26 Sep 2007 Posts: 96
|
Posted: Wed Nov 03, 2021 7:33 pm Post subject: |
|
|
Hey JB I'm sure the guys at Korg may not want to hear this but after reading a post from Danatkorg something kept coming back to me and it was something along the lines of you cant cross the firmware with the old editor version (or something like that) and it got me thinking....hang on I had tried so many things and they didnt work, so I tried using the old software editor version 1.0.0 while having firmware version 2.0.1 on the wavestate..
now it doesnt work everytime, but what i have noticed is if I run it after a reboot it seems to work, so its definitely not Korg or even Microsoft its my config, but as I have far too much audio software/utils/etc i cant wipe and start again, why not try the old editor, what's the worst than can happen? _________________ Korg Kronos 61, M3-73, Karma (all-time classic), X5, Wavestate, Roland Juno Gi, JV, D110, Arturia Microfreak, Modal Skulpt, IK Uno. Nanopad2, M-Audio Venom, Deepmind 12D, Crave, TB3, Maschine Mk3, Moog Werkstat and a few other bits |
|
Back to top |
|
|
jb58
Joined: 05 May 2021 Posts: 31
|
Posted: Wed Nov 03, 2021 9:20 pm Post subject: |
|
|
drdave2002 wrote: | Hey JB I'm sure the guys at Korg may not want to hear this but after reading a post from Danatkorg something kept coming back to me and it was something along the lines of you cant cross the firmware with the old editor version (or something like that) and it got me thinking....hang on I had tried so many things and they didnt work, so I tried using the old software editor version 1.0.0 while having firmware version 2.0.1 on the wavestate..
now it doesnt work everytime, but what i have noticed is if I run it after a reboot it seems to work, so its definitely not Korg or even Microsoft its my config, but as I have far too much audio software/utils/etc i cant wipe and start again, why not try the old editor, what's the worst than can happen? |
Thanks Dave, i will certainly give it a go ! |
|
Back to top |
|
|
Derek Cook Approved Merchant
Joined: 20 Jul 2014 Posts: 1279 Location: Wales, UK
|
Posted: Fri Nov 05, 2021 8:57 am Post subject: |
|
|
Hi,
FWIW, I am upgrading my studio computer right now, and job one was to get all external hardware communicating with the computer again, including the Wavestate
I am on OS 2 now and Windows 10, and the Wavestate was already set to NCM, so the NCM instructions on page 4 of the manual are what I followed.
I followed the instructions in the guidance to the letter and all was fine.
There is always a moment of trepidation when you startup the Librarian and there is a pause with no indication of activity before the Wavestate contents appear, so some form of activity indicator would be nice!
I'd recommend that people with problems in this area try the following, which I have used successfully with other driver installation issues
1) Unplug the Wavestate USB connection
2) Backup and take a restore point (always prudent before a major operation!)
3) Uninstall the driver package
4) Download and run USBOBLIVION (a tool for removing necessary device driver entries)
5) Reboot
6) Retry the Korg installation procedure _________________ Derek Cook - Java Developer
Follow kronos.factory development and submit ideas over at the kronos.factory Trello Board
My Echoes Music Website
My Carreg Ddu Music Website |
|
Back to top |
|
|
lys_knight
Joined: 30 Oct 2021 Posts: 5
|
Posted: Thu Nov 25, 2021 12:01 am Post subject: |
|
|
The following is the kind of useless answer from KORG when using the RNDIS connection. Never again I will be buying a KORG as you will never be able to update the firmware. I have many other Synths: Moog, ASM, Roland etc which have zero issues.
We spoke to a representative at Sweetwater and they mentioned that you are still having an issue updating your Modwave and Wavestate.
We sent the following information to Sweetwater…..
The only other time we’ve seen this, it appeared to be a problem with the DNS server.
Our guess is that if you looked in Bonjour Browser, you’d see that the instruments were resolving to IP addresses starting with “23.”
From the link below, this may be caused by a problematic DNS server setting, probably on their router.
A solution would be to change the DNS server to something else, such as 1.1.1.1 (cloudflare),
See also:
https://superuser.com/questions/1459131/ping-to-any-name-existing-or-not-on-lan-results-in-the-same-public-ip
Hopefully this will help resolve your customer's issue.
Sweetwater mentioned that you were able to get the DNS server to 1.1.1.1 on your router and that still did not resolve the issue.
If you are still having an issue, unfortunately, there might be something wrong with your network which unfortunately, we don’t support. There also might be something wrong with your computer or setting.
I would suggest try using a different computer or a different DNS server to update the Modwave and Wavestate.
Best regards,
Product Support
KORG USA Inc. |
|
Back to top |
|
|
adrianrees
Joined: 18 Oct 2021 Posts: 5
|
Posted: Thu Nov 25, 2021 8:12 am Post subject: |
|
|
I agree I’m at the point where I know that if I upgrade to Windows 11 I’ll wait who knows how long before I can finally sync, let alone Windows 10. Really poor. |
|
Back to top |
|
|
adrianrees
Joined: 18 Oct 2021 Posts: 5
|
Posted: Thu Nov 25, 2021 8:16 am Post subject: |
|
|
I just checked and the Korg Compatibility Chart has been updated to show that Windows 11 is ‘Under Examination’ just as Windows 10 21H1 still is. |
|
Back to top |
|
|
jb58
Joined: 05 May 2021 Posts: 31
|
Posted: Thu Nov 25, 2021 8:17 pm Post subject: |
|
|
Just to confirm: Wavestate doesn't connect in Windows 11. I have decided to upgrade, since in was already not working in the last Windows 10 version neither. |
|
Back to top |
|
|
teasltonerick
Joined: 04 Jul 2022 Posts: 4
|
Posted: Mon Jul 18, 2022 9:36 pm Post subject: Wavestate Librarian 1.1.1 will not connect to firmware 2.1.0 |
|
|
Wavestate Librarian 1.1.1 will not connect to firmware 2.1.0 on win 10 21H2 NO MATTER WHAT I DO!!!
I can't even get the Wavestate Native crossgrade because of the ridiculous dependency on the Librarian connection to get the coupon.
Very very frustrating.
Update... it is now 2 months later in Sep. 2022 and nothing but crickets from Korg support. |
|
Back to top |
|
|
Nadabrahma
Joined: 09 Oct 2022 Posts: 1
|
Posted: Thu Oct 13, 2022 11:00 am Post subject: WAITING FOR DEVICE |
|
|
Hi there,
here is another case of disconnection regarding Korg Wavestate Editor 1.1.1.
.Had installed Wavestate Upgrade 2.1.1 via "Boot method", Bonjour Service is active,
NCM is visible in Device Manager, BUT !!! A driver for that is not shown in this Manager. So, where can I get this NCM driver ?
All I see so far is "WAITING FOR DEVICE".
By the way : WIN 10 21H1.
Hope there will come a solution.
Peace |
|
Back to top |
|
|
franciscoq
Joined: 15 Oct 2022 Posts: 1
|
Posted: Sat Oct 15, 2022 8:57 am Post subject: Re: WAITING FOR DEVICE |
|
|
Nadabrahma wrote: | Hi there,
here is another case of disconnection regarding Korg Wavestate Editor 1.1.1.
.Had installed Wavestate Upgrade 2.1.1 via "Boot method", Bonjour Service is active,
NCM is visible in Device Manager, BUT !!! A driver for that is not shown in this Manager. So, where can I get this NCM driver ?
All I see so far is "WAITING FOR DEVICE".
By the way : WIN 10 21H1.
Hope there will come a solution.
Peace | Hi, same issue here! i also have a MODWAVE, no problem with that editor even without driver... works like a swiss clock! Can somebody please fix a working editor for the WAVESTATE please? Now i understand why the second market is overloaded with wavestate's... that's a pity |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|