View previous topic :: View next topic |
Author |
Message |
Jonesy
Joined: 17 Jul 2021 Posts: 2
|
Posted: Sat Jul 17, 2021 2:06 pm Post subject: My electribe 2 got broken by a house guest... help! |
|
|
So this brainless bovine knelt on my electribe, 2 Sampler, destroying the x/y pad. I opened up the unit and disconnected the x/y ribbon, put the unit back together and it worked, aside from no x/y pad.
It worked for about a day then it wouldn't power on at all.
I opened it again and everything looks fine... is there anything I can try to get it to power up one last time so I can get the pattern data off it?
There was "a lot" of stuff on it, the bulk of which is my latest project for a tv drama series score.
What can I do? |
|
Back to top |
|
|
LM Full Member
Joined: 09 Oct 2017 Posts: 143
|
Posted: Sun Jul 18, 2021 5:31 pm Post subject: |
|
|
How about: "you break it, you buy it"? |
|
Back to top |
|
|
Jonesy
Joined: 17 Jul 2021 Posts: 2
|
Posted: Sun Jul 18, 2021 8:27 pm Post subject: |
|
|
I have another electribe Sampler... if I swap the motherboard from the broken one into the functional one will I be able to access the pattern data? |
|
Back to top |
|
|
russellclarke Junior Member
Joined: 07 Jun 2019 Posts: 59
|
|
Back to top |
|
|
|