View previous topic :: View next topic |
Author |
Message |
frankarico
Joined: 06 Jun 2021 Posts: 2
|
Posted: Fri Jun 18, 2021 6:47 pm Post subject: Expression Pedal |
|
|
I have been using a M-Audio EX-P expression pedal with my Kronos with no problems. I recently updated the firmware to 3.1.3 and the pedal is not working. Has anyone else experienced any problems after updating the firmware?
The Korg expression pedals are very expensive $120- $175.. Can anyone recommend a cheaper alternative? |
|
Back to top |
|
|
HardSync Platinum Member
Joined: 07 Jan 2011 Posts: 794
|
Posted: Sat Jun 19, 2021 12:10 am Post subject: |
|
|
Most expression pedals should work fine. Unless your pedal itself is broken, if it worked before, it should still work now. Before you buy a new pedal, first confirm that the settings in the Kronos have not changed. Go to your Global P2: Controllers/Scales page and ensure that the "Foot Pedal" setting is not set to OFF or something else that you don't want it to do.
But if you do need a new pedal, probably a good "cheap" pedal is the Nektar NX-P Universal Expression Pedal. It's only $20. But it's been out of stock pretty much everywhere for a while now. The Yamaha and Roland pedals are also good. I've used the Roland EV-5 before. It's solid. The Moog EP-3 pedal also is an option. |
|
Back to top |
|
|
jg:: Platinum Member
Joined: 14 Aug 2003 Posts: 685 Location: Melbourne, Australia
|
Posted: Sun Jun 20, 2021 3:54 am Post subject: |
|
|
The Behringer FCV-100 is solid and works very well.
But yes, as the previous poster said, check all your settings in Global mode first. |
|
Back to top |
|
|
frankarico
Joined: 06 Jun 2021 Posts: 2
|
Posted: Sun Jun 20, 2021 10:45 am Post subject: Pedal is set up correctly |
|
|
The assignable pedal is set up correctly in global |
|
Back to top |
|
|
|