 |
Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
|
| View previous topic :: View next topic |
| Author |
Message |
SR-Alan
Joined: 31 Aug 2020
Posts: 2
Location: England
|
 Posted: Mon Oct 26, 2020 9:49 pm Post subject: Wavestation SR vector controller |
 |
|
As the Wavestation SR lacks a vector joystick and needs an external controller to take full advantage of its abilities is anyone using the Korg nanoPad2 for the vector controller ?
_________________
Korg Wavestation SR, Yamaha SY55 + Analog & Digital cards. Roland MC202, Boss DR550, Fostex DCM100 Mixer, Alesis Microverb |
|
| Back to top |
|
 |
voip
Platinum Member
Joined: 27 Nov 2014
Posts: 3772
|
| Posted: Wed Oct 28, 2020 8:23 pm Post subject: |
|
|
The Korg Kontrol editor allows the nanoPAD2 touch pad to be setup so that CC#16 and CC#17 messages can be sent for X and Y positions on the touch pad, respectively, and the SR will recognise these as Vector Joystick X and Y, so yes, it should work. It will need some sort of MIDI host between the nanoPAD2 and the SR's MIDI In DIN connector. It could be a PC with USB to MIDI interface and running some sort of MIDI bridge software, or something like the Kenton MIDI Host mk2:
https://kentonuk.com/product/midi-usb-host-mkii/
The nanoPAD2 touch pad, by default, is configured to send a "touch enable" signal on CC#16, when touch is detected, with values of 127 for touch on and 0 for touch off, which will mess with the X direction data, so needs to be disabled. Again this can be done using the Korg Kontrol editor.
. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
