Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Rode NT1 - Phantom Power?

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Kronos
View previous topic :: View next topic  
Author Message
Wagnergrad96
Full Member


Joined: 11 Mar 2016
Posts: 134
PostPosted: Fri May 15, 2020 2:39 am    Post subject: Rode NT1 - Phantom Power? Reply with quote
So, I was able to buy a used RODE NT1 from a friend. I've never used a condenser mic for anything before and then I realized that there is not setting I could find on the KRONOS to use phantom power.

Is this possible or do I have to buy a preamp? Thanks
Back to top
View user's profile Send private message Send e-mail
Liviou2004
Platinum Member


Joined: 20 Feb 2017
Posts: 1150
Location: France
PostPosted: Fri May 15, 2020 6:06 am    Post subject: Re: Rode NT1 - Phantom Power? Reply with quote
Wagnergrad96 wrote:
So, I was able to buy a used RODE NT1 from a friend. I've never used a condenser mic for anything before and then I realized that there is not setting I could find on the KRONOS to use phantom power.

Is this possible or do I have to buy a preamp? Thanks


Hi, the Rode NT1 needs a +48V phantom power.
The Kronos does not deliver phantom power. So, you have to get an external power for your Mic before plugging into the Kronos ana analog input.
Back to top
View user's profile Send private message
Wagnergrad96
Full Member


Joined: 11 Mar 2016
Posts: 134
PostPosted: Sat May 16, 2020 12:58 am    Post subject: Re: Rode NT1 - Phantom Power? Reply with quote
Liviou2004 wrote:

Hi, the Rode NT1 needs a +48V phantom power.
The Kronos does not deliver phantom power. So, you have to get an external power for your Mic before plugging into the Kronos ana analog input.


I was able to get a Studio Projects VTB1 V Series

But I don't think I have the correct power source yet.

I hope that will be able to help.
Back to top
View user's profile Send private message Send e-mail
Liviou2004
Platinum Member


Joined: 20 Feb 2017
Posts: 1150
Location: France
PostPosted: Sat May 16, 2020 7:15 am    Post subject: Re: Rode NT1 - Phantom Power? Reply with quote
Wagnergrad96 wrote:
Liviou2004 wrote:

Hi, the Rode NT1 needs a +48V phantom power.
The Kronos does not deliver phantom power. So, you have to get an external power for your Mic before plugging into the Kronos ana analog input.


I was able to get a Studio Projects VTB1 V Series

But I don't think I have the correct power source yet.

I hope that will be able to help.


Yes it provides a +48V phantom power. But make a good output level setting for the Kronos analog entry in order to avoid clipping.
Also, I recommend you to use a balanced jack-jack wire or XLR-Jack wire between VTB1 and Kronos analog entry.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Kronos All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group