Korg Forums

metaprog · Joined: 02 Jan 2012 Posts: 12 Location: Belgium

Hello everybody,

Did not find any answer in the user guide….

Is there any way to play homemade multisamples with the CX-3 engine ? So that you can use the sliders as 9 organ drawbars, but with your own sounds.

Or to convert multisamples in Exi ?

Thanks a lot

Liviou2004 · Posted: Mon Jan 20, 2020 9:48 am Post subject:

Hello,

No. You can use CX-3, sample it and play it in HD-1 but not the opposite.

Though, the only way to do what you want is to place your diifferent homemade organ samples in several HD-1 progs (for example one prog for 2', another one for 4', etc....), create a combi with these different HD-1 prog and use the volume sliders of each track of the combi as you would do in CX-3.

metaprog · Joined: 02 Jan 2012 Posts: 12 Location: Belgium

I was expecting this kind of reply.

Yes, the combi is the only solution for using drawbars.

Thanks for your help.

ronnfigg · Posted: Wed Jan 22, 2020 5:41 pm Post subject:

And technically speaking, they wouldn't be considered drawbars. You would have a layered Combi with the timbre volumes being controlled by the sliders.
_________________
"To me the synthesizer was always a source of new sounds that musicians could use to expand the range of possibilities for making music."
Bob Moog

Liviou2004 · Posted: Thu Jan 23, 2020 7:30 am Post subject:

metaprog · Joined: 02 Jan 2012 Posts: 12 Location: Belgium

Yes, that's correct.
Thanks