View previous topic :: View next topic |
Author |
Message |
Dumoulip
Joined: 11 Jan 2020 Posts: 6 Location: Laval, Qc
|
Posted: Sun Jan 12, 2020 1:30 pm Post subject: can I route a sequencer track to a specific audio out? |
|
|
Hey every one, I’m trying to find a way to optimize the playback of pre-recorded tracks that play on top of my band’s live playing. Ideally, I would love for one or more of the korg kronos sequencer tracks playing back to be sent to a specific audio out on the Korg (maybe even the headphones jack), say the click track, while other tracks get sent to an audio out that actually plays in our mix. Is this possible? I’m not finding a lot of documentation on this... if not possible, any alternate suggestions? Perhaps sending the click track as midi data to another piece of equipment? If so, what kind of equipment would be appropriate? Thanks so much for your attention! |
|
Back to top |
|
|
toeti
Joined: 18 Sep 2012 Posts: 37 Location: Herdecke
|
|
Back to top |
|
|
Dumoulip
Joined: 11 Jan 2020 Posts: 6 Location: Laval, Qc
|
Posted: Sun Jan 12, 2020 1:56 pm Post subject: |
|
|
Thanks for the insanely quick response! I will look into this lead you just provided. I came across these very screens but had not caught on to how they could be used this way. Flipping through said pages in parameter guide right now. Thanks so much for the tip! |
|
Back to top |
|
|
pete.m Senior Member
Joined: 05 Apr 2013 Posts: 484
|
Posted: Mon Jan 13, 2020 8:26 am Post subject: |
|
|
Just a minor thing...you can also send the tracks out to 1, 2, 3 or 4 individually as mono tracks, in addition to using the 1/2 and 3/4 outputs as pairs. |
|
Back to top |
|
|
Dumoulip
Joined: 11 Jan 2020 Posts: 6 Location: Laval, Qc
|
Posted: Mon Jan 13, 2020 12:24 pm Post subject: |
|
|
Right! That may come in handy. With all this new info, I’m currently evaluating cabling options to get the signal to my drummer’s earphones from the trs balanced audio outputs. Thanks again! |
|
Back to top |
|
|
qqquartzzz Junior Member
Joined: 24 Apr 2018 Posts: 71 Location: Ontario Canada
|
Posted: Wed Jan 15, 2020 3:22 pm Post subject: |
|
|
I send a click track only through 1/2 to the drummer and mix all the backing through the main Left and Right outputs. The click track goes to a little Behringer headphone amp in stereo. Works Vunderbar.
Keeping it simple... |
|
Back to top |
|
|
Dumoulip
Joined: 11 Jan 2020 Posts: 6 Location: Laval, Qc
|
Posted: Wed Jan 15, 2020 4:00 pm Post subject: |
|
|
Right, sounds like a good approach. And I just ordered the behringer amp800 for earphone routing, the added benefit being that it seems to natively handle trs balanced signals, which are output by the Korg. Thanks for the input! This addresses a major issue for me! |
|
Back to top |
|
|
|