|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
QualityNotQuantity
Joined: 08 Nov 2017 Posts: 12
|
Posted: Sun Jan 12, 2020 1:16 am Post subject: Help Pls? Setting MicroKorg Up In Reason To Control Synths |
|
|
Currently I am successfully using my Microkorg + Triton Extreme as midi controllers in Reason.
1. I have no problem using my Korg keyboards to play soft instruments VST's etc and record midi notes.
2. I have no problem using the Microkorg to play Triton sounds and vice-versa using a Reason External Midi Instrument.
3. I also have audio from both Keyboards going into Reason via my Babyface pro + TotalMix - so all good so far.
I really want to use / assign the MicroKorg CONTROLS 1, 2, 3, 4, 5 knobs and PROGRAM NUMBER
1, 2, 3, 4, 5, 6, 7, 8 keys to control soft synth parameters / controls etc
I have read the manual and searched for videos but I can not get my head around it.
ps with so many buttons / knobs on the Triton Extreme - can these be assigned as well?
Any help? - step by step guides would be greatly appreciated. |
|
Back to top |
|
|
OpAmp Platinum Member
Joined: 07 Jun 2013 Posts: 1173 Location: Brussels, BE
|
Posted: Sun Jan 12, 2020 6:59 pm Post subject: |
|
|
Hi,
Concerning the microKorg.
The program numbers 1 to 8 can not really be used. When pushed, the board will transmit the MIDI message "program change", followed by the number of the program (1 to 128). This also depends on the bank select dial and bank side key (A/B). It can be used to select another preset in the VST to which it has been assigned.
The controls 1 to 5 send out the MIDI message "Control Change" (CC#) followed the number of the control and the value for it. This can be used for controlling your VST parameters. The control number depends on the edit select dials (the selected row in the parameter matrix). Refer to the table in the manual (p56) for the control numbers assigned to the different parameters (these are the factory default assignments). E.g. if you choose the mixer row, knob 1 to 3 will send out respectively CC#20 to CC#22 + the position of the knob (0-127). Knob 4 and 5 will not send anything as they don't have a function on the mixer row.
Concerning the Triron
The same story is applicable as for the microKorg. You'll need to look in that manual to find out which control sends out what CC# number.
Setting up Reason
I've no experience with it. Typically these things have some MIDI setup page, or some right click option to assign a physical control to a synth parameter and a learning function so that you don't really need to dig into the manual. Get inspiration here: https://www.youtube.com/watch?v=szAq_CplbUk.
Have fun! _________________ microKORGXL, Kaossilator Pro, monotribe, SQ-1, volca fm, Kross 88 BK
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G |
|
Back to top |
|
|
QualityNotQuantity
Joined: 08 Nov 2017 Posts: 12
|
Posted: Sun Jan 12, 2020 10:42 pm Post subject: |
|
|
Thank you OpAmp for your detailed reply and link etc.
I now have the Triton Extreme rotary knobs controlling some Reason soft synths parameters - but seeing how it speeds up work flow I want more
Before I knew it I was searching for more dedicated midi controllers.
The KORG nanoKONTROL2 is quite cheap and is covered by Reason so I am going to give that a try.
Thanks again. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|