Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Sending Program Changes from Kronos Combi to Mainstage

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Kronos
View previous topic :: View next topic  
Author Message
Kilroy
Junior Member


Joined: 29 Jan 2002
Posts: 90

PostPosted: Tue Nov 24, 2020 11:47 pm    Post subject: Sending Program Changes from Kronos Combi to Mainstage Reply with quote

Has anyone done this successfully? Hoping someone has been successful otherwise there may be a bug in MainStage 3.5.

I have a combi with timbre 1 Timbre Parameter/MIDI set up as follows:

EXT2
16
001
001

This should send a program change message to change to bank 1 program 1 on MIDI ch 16.

On the Mainstage side, I have the concert set up to receive program changes on Ch16 from the KRONOS. I have the preferences setup for the range to be 1...127 per the korg format. I also have a patch set up as bank 1, program 1 in the Patch Inspector/Attributes panel.

It does not work. The only way it works is if I set a mainstage patch to be B1 P1 and set the combi to send the same data. I did notice that in Mainstage's Midi Monitor, it is receiving the following from on Ch16 from the Korg when I select a combi:

Control Change: 0 (Bank MSB) Value:0
Control Change: 32 (Bank LSB) Value:1
Program Change Value:0
Control Change: 7 (Volume) Value:127

Does anybody see any red flags in the data stream? I am curious as to why it is sending Control Change Data instead of Program Change Data and then sending Program Change 0, but they may just be the MIDI nomenclature I am admittedly unfamiliar with.

Sorry this is so long, I wanted to give you all the data I have. Hopefully someone has come up against this or can help me figure out the problem, or if at least the Kronos is sending the right data.

Thank you.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Kronos All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group