Korg Forums

[sauriol69]

i there...

ive got my electribe for a almost a year now and this started not to long ago!! sometimes there is no sounds from a particular step!! not all but just some... example a simple hithat every 4 bars and only one plays on the first 16 then two for the next and then maybe all plays!!! i tried clear sequence it clears everything but if i put back the note/sound same thing again, the exact same one plays and the exact same one doesn't!!!

could it be the part erase that when you do it, it erase for ever lolll
i ve copied the pattern to another one samething...
ive copied the part to another step like from 15 to 7 that one work great, then copied that one back to 15... same thing again its like some part are completly mute!!!

tks in advance guys

very disturbing and frustrating....

[sohatyi]

The 13/14 and 15/16 by default are mute groups, to simulate hihats. If 13 is sounding, 14 will cut it off and vice versa. You can switch this on and off per part. Check it out in the manual.
_________________
Korg: M3M, EMX2, EMX1 (x2), ESX1, ER1, EA1, R3, MicroKorg, MicroSampler, Micro X, KP2, KP3, KPMini 1&2, KO1&2, KP Pro
Roland: SP808, MC505, Handsonic 10, Fantom X6, RC505, CG8
Emu: Command Station MP7 (x3!), Proteus 2000, Planet Earth, Virtuoso, Planet Phatt, XBoard49
Novation: UltraNova, Nova
Yamaha: RM1X, CS2X, DX11, DX Reface, YC Reface
Other: Zoom R24, Quasimidi 309, Beat Thang, Akai MPC1000 and a couple of Omnichords

[sauriol69]

Tks ive seen this in the parameters and didn't know what it was for!! Hehe I'll try that...

Its very appreciated