View previous topic :: View next topic |
Author |
Message |
PB21
Joined: 11 Jun 2012 Posts: 42
|
Posted: Sat Oct 24, 2015 8:54 am Post subject: sq1 and monotribe |
|
|
Hi I currently have my SQ1 connected to my MS20 mini as per the Korg instruction and works perfectly.
I would like to have the A part for the ms20 mini and the B part for the monotribe.
I have a split out cable and the monotribe in CV mode with 1 on, 2 on and step 3 on in cv setup mode.
However when i play the SQ1 the monotribe sounds but has no pitch variation, it also is responding what appears to be output A to despite being connected to B cv/gate.
Some assistance would be appreciated as the SQ1 has opened up the ms20 nicely.
I only found 1 video of the sq1 controlling the Monotribe and it doesnt5 say in the Korg SQ1 FAQ how to set it up with the monotribe.
regards _________________ Peter Bailey |
|
Back to top |
|
|
rotallicso
Joined: 30 May 2010 Posts: 15
|
Posted: Thu Nov 05, 2015 11:42 pm Post subject: |
|
|
verify the cable works at the MT by taking the Gate and Keys out from the 20 direct to the MT - ensure you're sure what is the gate and what is pitch, it'll help you ascertain the polarity is right and that the Hz/v is set right on MT - if not make sure you calibrate teh MT with reference voltages from the 20 - then try again
.
many modes are just mirroring A to B so check you have what you expect on SQ1
drive the sq1 with the MT sync/clock to keep them together |
|
Back to top |
|
|
PB21
Joined: 11 Jun 2012 Posts: 42
|
Posted: Sun Nov 08, 2015 6:59 pm Post subject: CV Tune with SQ1 |
|
|
I made a new cable and now I have control of pitch and note value. How do I calibrate the monotribe with the SQ1 as the cv setup wants me to play note C4? _________________ Peter Bailey |
|
Back to top |
|
|
|