View previous topic :: View next topic |
Author |
Message |
FLBR
Joined: 06 May 2024 Posts: 3
|
Posted: Mon May 06, 2024 5:23 pm Post subject: ARP stops in split mode |
|
|
Hello,
I have a problem when I use the arpeggiator in combi mode. I would like to be able to let the arpeggiator play with the "latch" function on a certain part of the keyboard, and use my 2 hands to play another sound on another zone while keeping the arpeggiator running but this is not possible, as soon as I play on the other zone without holding the notes of the arpeggiator, it stops.
Did I forget a function?
Thank you in advance for your answers
Frédéric |
|
Back to top |
|
|
Dan Stesco Approved Merchant
Joined: 11 Dec 2009 Posts: 639 Location: Bucharest
|
Posted: Tue May 07, 2024 4:38 pm Post subject: |
|
|
Hi ! It is possible. I think we also made some combi with independent arp on factory working. You have to take care of trig zone that is different then key zone. Also the arp can run on different midi ch. So you can play on Gch as well.
Will find a solution tommorow and will be back. _________________ http://www.danstesco.ro |
|
Back to top |
|
|
FLBR
Joined: 06 May 2024 Posts: 3
|
Posted: Wed May 08, 2024 9:06 am Post subject: |
|
|
Hi Dan,
Thank you very much, yes I finally found the solution !
You have to go to ARP-DRUM, then "edit" and in the "Scene common setup" part, press "More" you then access the screen which offers split zones for the Arp 1 and Arp 2... and it works.
We must define the zone in which we want the arpeggio to play exclusively. it will remain on when playing in a zone for which it is not assigned.
thank you very much for your answer which allowed me to find the solution
Frédéric |
|
Back to top |
|
|
Dan Stesco Approved Merchant
Joined: 11 Dec 2009 Posts: 639 Location: Bucharest
|
Posted: Wed May 08, 2024 11:59 am Post subject: |
|
|
I'm glad you find the solution .
Also you have to check the Timbre Zone Bypass. The arp must play in a full range, different of sound zone you already set to avoid the key playing for arp timbre.
For example the trig zone of bass is C-1 to B3. The bass timbre keyboards zone is C-1 to G9. The arp will trigged the timbre in the lower zone but will play on upper zone by your hand. You have to limit the timbre Zone from C-1 to C-1 to avoid any other key to play and check the Timbre Zone Bypass for arp pattern. Is the solution to have the ARP completely independent.
If is hard to understand what I mean please let me know. I could send a Combi example. _________________ http://www.danstesco.ro |
|
Back to top |
|
|
|