View previous topic :: View next topic |
Author |
Message |
KorgUserPlayer
Joined: 30 Mar 2019 Posts: 6
|
Posted: Sun Jun 12, 2022 9:02 pm Post subject: Using a CONDENSER MICROPHONE for AUDIO RECORDING |
|
|
I'm the owner of the KROSS 61 w|station and I've read in the Quick Start Guide that the KROSS workstation doesn't support any of the condenser mics because they require a phantom power supply. The only hole that Kross does have to connect a mic fo recording audio is a 1\4" phone-jack, which only supports dynamic mics.
A condenser mic uses a different type of input-output connectors/jacks (and different types of cables) than a dynamic one and also has a 48V supply voltage that makes it impossible to connect it to the Kross.
The question is:
Is there any possibility to connect a CONDENSER MIC to the instrument (may be by using some special equipment or/and adapters) ?
P.S. I've heard of a DI-Box tool, but it doesn't seem to work with that 1\4" phone-jack. |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3776
|
|
Back to top |
|
|
KorgUserPlayer
Joined: 30 Mar 2019 Posts: 6
|
Posted: Fri Jun 24, 2022 8:25 pm Post subject: |
|
|
I'm sorry but I can't open the link you gave.
Are there other online stores selling this injector to know what it looks like, what's the price etc ?
I've just found some XLR-male to BALANCED (TRS) 1/4-male" jack on Amazon and they said in the description that it must NOT be used to connect a CONDENSER MIC with 48V to 1/4" jack.
The KROSS station also has an UNBALANCED(TS) 1/4"-female input that not allow you to completely eliminate noise. So that's the problem!
There is some information on the Internet that states that you should not connect a CONDENSER MIC to any of the TS or TRS inputs so as not to cause any serious problems with your KEYBOAD STATION.
This can be dangerous and the QUALITY of the recording will not be as good as when using a standard XLR-XLR cable connected to an audio device (audio interface).
Maybe there is a way to connect a condenser microphone with 48V somehow else, for example through a mixer console connected straightly to the Kross?
P.S. Seems that I still can't find a proper solution to the problem...
[/b] |
|
Back to top |
|
|
stuartpryer Approved Merchant
Joined: 10 Jan 2002 Posts: 368 Location: Cornwall - U.K.
|
Posted: Fri Jun 24, 2022 8:38 pm Post subject: |
|
|
Hi.
Yes. Run you condenser mic to a mixer that provides phantom power. Most do. Take the mixer output to the synth audio in.
Cheers
Stuart _________________ Stuart Pryer
Triton Controller, Midi toolbox and Fractal Sequencer Software
web site https://stuartpryer.co.uk
e-mail stuartpryer@gmail.com
|
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3776
|
Posted: Sun Jun 26, 2022 4:12 pm Post subject: |
|
|
The phantom power injector in the link is the Chord PH481. Several other online stores carry the product. Hopefully an internet search will find a link that works. The power injector output isolates the 48V supplied to the microphone, so it shouldn't damage the Kross' input.
. |
|
Back to top |
|
|
|