View previous topic :: View next topic |
Author |
Message |
ronniecruisin Junior Member
Joined: 04 Nov 2008 Posts: 53 Location: Australia
|
Posted: Thu Jul 29, 2021 4:07 am Post subject: HOW TO SYNC SEQUENCER FROM ANOTHER DEVICE |
|
|
Hi. All. Am trying to sync a Roland VS 2400 Recorder to start the M3 sequencer but am having no luck. Just want to trigger the M3M when play is pushed on the VS. Cant see a simple Sync external parameter on the M3 to do this. Anyone know how please??? _________________ ronnie |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3777
|
Posted: Fri Jul 30, 2021 9:03 am Post subject: |
|
|
The M3 sends a SysEx start message (FA), which could be used to start the VS-2400. |
|
Back to top |
|
|
ronniecruisin Junior Member
Joined: 04 Nov 2008 Posts: 53 Location: Australia
|
Posted: Sat Jul 31, 2021 12:04 am Post subject: |
|
|
Hi. Thanks for that. So It cant be done using the VS2400 as master??? All I'm trying to do is simply trigger the M3 sequencer. From past experience with many other machines it was very easy to do. Not the case with the M3??? Would prefer the VS to be the master. _________________ ronnie |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3777
|
Posted: Sat Jul 31, 2021 9:59 am Post subject: |
|
|
Not saying it can't be done. I'm just not familiar with the VS-2400.
Presumably the "two 'synchronised' fingers" approach not suitable.
Looking at the M3 MIDI Implementation chart for the M3, in order to receive the SysEx FA message to Start and FC message to Stop the Sequencer, the MIDI clock in Global mode needs to be set to External MIDI, and "Receive Ext. Realtime Commands" in Global mode needs to be checked.
Looking at the VS-2400's AP-Appendices document, MIDI Implementation section, the VS-2400 will transmit the FA and FC SysEx messages when UTILITY-SYNC screens SYNC MODE is “INT” and SYNC Gen. is “MIDIclk” or “SyncTr.”
Hopefully that helps.
. |
|
Back to top |
|
|
ronniecruisin Junior Member
Joined: 04 Nov 2008 Posts: 53 Location: Australia
|
Posted: Sun Aug 01, 2021 11:25 pm Post subject: |
|
|
Thank you muchly. All fixed and working perfectly, Could not find that page at first. Got it now.... All Good and very much appreciated. _________________ ronnie |
|
Back to top |
|
|
|