Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Electribe Sampler factory samples corrupted. backup file req

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Electribe
View previous topic :: View next topic  
Author Message
Entorwellian



Joined: 13 Mar 2021
Posts: 1

PostPosted: Sat Mar 13, 2021 2:33 am    Post subject: Electribe Sampler factory samples corrupted. backup file req Reply with quote

Hi. My Electribe Sampler factory samples have become corrupted and I was hoping someone share their e2sSample.all file of a factory backup.

I've had my Electribe Sampler (Red) in storage for about 3 years and just took it out recently to try it out. The first day it sounded great, nothing wrong. Next day I tried it most of the samples were noisy static. I tried a factory reset but most of the samples remained the same. Here is a link of one of the factory samples that was directly exported from a sd card: https://we.tl/t-SxyJe0bI5A (link will last a week)

I don't know what is wrong with it and I contacted KorgUSA support already, with no response. However, the virtual analog oscillators and samples read off of the SDcard play just fine, as does resampling. I theorize that something happened with the ROM on the machine, but I am not sure since I can't find anyone else who has experienced the same problem.

In light of all of this, I was hoping that someone here can share a clean factory e2sSample.all file on here so I can get around the problem if there is no solution.
Back to top
View user's profile Send private message
Poumtschak
Senior Member


Joined: 06 Jan 2007
Posts: 295
Location: GMT+1

PostPosted: Wed Mar 24, 2021 11:33 am    Post subject: Re: Electribe Sampler factory samples corrupted. backup file Reply with quote

Looks like a hardware failure (ROM or RAM chips).

On both electribe 2 & 2S, the factory waveforms are in ROM.

You can't export those in a e2sSample.all file on the sampler.

Edit : you can, actually. It's written in the manual. My bad.

But Korg only provides the parameters for the presets, not the samples. Which is weird.

https://www.korg.com/us/support/download/software/0/368/3066/
_________________
My electribe2 lousy patterns and stuff | KORG gear: NTS-1, nanoKEY2, electribe2/2S, WS/SR, WS/EX (on storage)
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Electribe All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group