Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

editing all velocity on track

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg M50
View previous topic :: View next topic  
Author Message
Alp
Full Member


Joined: 09 Jan 2010
Posts: 137

PostPosted: Mon Feb 22, 2021 1:16 am    Post subject: editing all velocity on track Reply with quote

Hello group.

Today I entered a drum track manually.
After sending it to DAW I noticed some of the beats were too loud and I wanted to bring all beats to same volume.
I tried a sound processing normalize function but it did not work as expected, neither did a limiter function.

I could discover no other way on the M50 either, except to go into track events and change all the velocities to the same value manually.

For the next time..... is there a faster way to do this?

Alp
Back to top
View user's profile Send private message
Musicwithharry
Platinum Member


Joined: 23 Mar 2012
Posts: 694
Location: Anamosa, IA

PostPosted: Mon Feb 22, 2021 1:44 pm    Post subject: Re: editing all velocity on track Reply with quote

Alp wrote:
Hello group.

Today I entered a drum track manually.
After sending it to DAW I noticed some of the beats were too loud and I wanted to bring all beats to same volume.
I tried a sound processing normalize function but it did not work as expected, neither did a limiter function.

I could discover no other way on the M50 either, except to go into track events and change all the velocities to the same value manually.

For the next time..... is there a faster way to do this?

Alp


In the Sequencer Menus, you should have the ability to change velocity on any track. This would allow you to change the velocity on any note in the sequence to whatever you want it to be. If you want them all the same volume, then go into that track in the Sequencer Menu and change the velocity. If you want to change individual notes, you can do it there too.

Go into the sequencer, hit the Menu button and that should bring you into the sequencer edit menu section.

Select the track you want to edit.

Hit the upper right button on the screen and you will bring up another menu.

Select Modify Velocity and make your changes Smile

All of this is on Page 166 in the manual.

Grace,
Harry
_________________
Alesis Vortex Keytar, Alesis QS6.2, Alesis QSR, Alesis SR-16, Behringer Deepmind-12, Ensoniq Avista 7600, Ensoniq VFX, Ensoniq VFX-SD, Ensoniq SQ1+, (2) Ensoniq SQ-R+/32, Korg i3 (2020 Version), (2) Korg Kross 1-61, (2) Korg Kross 1-88, Korg Minilogue XD, Korg Minilogue XD Module, Korg M50-61, Korg PA700, Korg X5DR, Korg Z3, Kurzweil SP1, Lowrey EZP3 (bascially a Kawai), Roland D-05, Roland E-09, Waldorf Streichfett, Yamaha Reface CP, Yamaha Reface CS, Yamaha Reface DX, Yamaha Reface YC
Back to top
View user's profile Send private message Visit poster's website
Alp
Full Member


Joined: 09 Jan 2010
Posts: 137

PostPosted: Tue Feb 23, 2021 4:00 am    Post subject: Reply with quote

Yes.
I found this page and I tried it before having to edit each entry manually. It did not give the desired results so I gave up and did it the hard way.

I suppose the root of the problem is that I do not fully understand what to enter into this window.

You have a start and end track, which I believe is simple enough to enter. Then you have beat tick for start track and beat tick for end track,... i think, which I guess I leave alone.

Then there is note range, which I assume I leave alone, then you have velocity start and velocity end values, which I would now guess would be both set to the desired velocity (lets say 30) ?
and then intensity value, which I have no idea about, so I would leave it alone.

Well, I just did it and .... it worked this time.
I have a feeling the first time I tried, I may not have set the start velocity to the desired final value perhaps.

Thank you for your help.
Back to top
View user's profile Send private message
Musicwithharry
Platinum Member


Joined: 23 Mar 2012
Posts: 694
Location: Anamosa, IA

PostPosted: Tue Feb 23, 2021 2:57 pm    Post subject: Reply with quote

Alp wrote:
Yes.
I found this page and I tried it before having to edit each entry manually. It did not give the desired results so I gave up and did it the hard way.

I suppose the root of the problem is that I do not fully understand what to enter into this window.

You have a start and end track, which I believe is simple enough to enter. Then you have beat tick for start track and beat tick for end track,... i think, which I guess I leave alone.

Then there is note range, which I assume I leave alone, then you have velocity start and velocity end values, which I would now guess would be both set to the desired velocity (lets say 30) ?
and then intensity value, which I have no idea about, so I would leave it alone.

Well, I just did it and .... it worked this time.
I have a feeling the first time I tried, I may not have set the start velocity to the desired final value perhaps.

Thank you for your help.


I am glad to help. My M50 does not see a lot of sequencer use these days, as I have the PA700 to do most of my sequencing. The M50 has the advantage of being able to layer different tracks to the same MIDI channel. The PA700 does not do this but the editing is right up there and even beyond what my other sequencers do.

The Velocity thing is a bit weird on the M50 when adjusting; I find it easier on the PA700.

If you are adjusting the entire track, then the start tick would be the first beat of the measure and the end tick is the last beat of the measure. You can also select the measures that you want to have the velocity adjusted. Usually, at least in my experience, that is the beginning and end of a track.

The Note Range would be the range of notes that you want to have the vlocity adjusted. I find that I adjust the hi-hats more often than any other drum sound and those are designated to certain notes on the keyboard.

The velocity start and end is the range in which the velocity starts at and ends at. The intensity value, I believe, is the intensity of the velocity itself. That information is on page 203. The higher the intensity, the more it will be within the velocity range you selected. Page 204 also talks about the velocity curves that you can select. I usually would use Curve 1.

I am glad that you were able to find it and get something that works for you.

The M50 is a wonderful instrument still, but I mainly use mine for solo sounds now, including custom distored lead guitar sounds that I have made.

Grace,
Harry
_________________
Alesis Vortex Keytar, Alesis QS6.2, Alesis QSR, Alesis SR-16, Behringer Deepmind-12, Ensoniq Avista 7600, Ensoniq VFX, Ensoniq VFX-SD, Ensoniq SQ1+, (2) Ensoniq SQ-R+/32, Korg i3 (2020 Version), (2) Korg Kross 1-61, (2) Korg Kross 1-88, Korg Minilogue XD, Korg Minilogue XD Module, Korg M50-61, Korg PA700, Korg X5DR, Korg Z3, Kurzweil SP1, Lowrey EZP3 (bascially a Kawai), Roland D-05, Roland E-09, Waldorf Streichfett, Yamaha Reface CP, Yamaha Reface CS, Yamaha Reface DX, Yamaha Reface YC
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg M50 All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group