View previous topic :: View next topic |
Author |
Message |
Booris
Joined: 20 Sep 2020 Posts: 8
|
Posted: Sun Sep 20, 2020 5:56 pm Post subject: Korg N364 Problem New 2020^)) |
|
|
Hello there!! sorry.. unexpected problem with N364-how to go to the editor with letters in the settings, for example, 1B, 2C, 4D, and so on.. for some reason, I only have editions with settings 1A, 2A, 3A.... and so on.. I CAN't switch to other "letters" in the options.. how is this done?? or maybe I have problems with the device itself?? bought recently from an auction, the device looks in good shape, everything works, even the disk drive.. but what is the problem with these parameters?? the former owner rarely used it and does not know about it at all:)) what can you suggest?? thanks:)) sorry for the English..in touch Russia, Siberia:) |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3777
|
Posted: Sun Sep 20, 2020 6:49 pm Post subject: |
|
|
In Edit mode, try pressing the Function buttons to move through the menu levels.
. |
|
Back to top |
|
|
Booris
Joined: 20 Sep 2020 Posts: 8
|
Posted: Sun Sep 20, 2020 7:42 pm Post subject: |
|
|
are these arrows?? Yes, I have not clicked any more ... I wonder-for those who have everything working - how do they change the values of these letters?? |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3777
|
Posted: Sun Sep 20, 2020 8:34 pm Post subject: |
|
|
The cursor keys take you through the main edit menus. The Function buttons are the row of 8 buttons to the right of the Volume slider, and allow the selection of various LCD screen groups for parameters and functions during Edit mode. This works for Programs and Combis, and also in Sequencer and Global modes, plus also in Disk mode and Arpeggio mode. Try them and see what happens in Edit mode. The Function keys act as toggles, so pressing them a second time returns you to the previous menu.
. |
|
Back to top |
|
|
Booris
Joined: 20 Sep 2020 Posts: 8
|
Posted: Sun Sep 20, 2020 9:27 pm Post subject: |
|
|
perhaps the SECOND time they just do not work.. that is, in fact, I need information ABOUT how this change is CAUSED in a HEALTHY device.. that's what.. maybe it's the buttons.. but maybe not..I need precise information-exactly how the correct transition to the letters B, C, D, and so on works.. for all the other options, I probably already tried.. |
|
Back to top |
|
|
Booris
Joined: 20 Sep 2020 Posts: 8
|
Posted: Sun Sep 20, 2020 9:39 pm Post subject: |
|
|
yes.. now I thought about it.. perhaps the buttons are installed incorrectly after any repairs.. it is the 1-8 buttons on the panel to the right of the volume slider that are used.. if they switch to these modes.. either the buttons themselves are "wrong system", or they are incorrectly soldered.. perhaps.. hmm.. how else to find out exactly.. |
|
Back to top |
|
|
Booris
Joined: 20 Sep 2020 Posts: 8
|
Posted: Sun Sep 20, 2020 9:52 pm Post subject: |
|
|
voip, do you have this unit in use?? that is, for accurate information, you need this device itself.. a couple of clicks from the host-and I may already have a more " accurate understanding"))))))))) where do the" legs grow " in the problem:)) wait?? or do you have exact information about this" magic " switch for me??))))) |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3777
|
Posted: Mon Sep 21, 2020 9:47 am Post subject: |
|
|
In the middle of moving home, which has taken far too long with this pandemic going on. All boards, except one, are in strorage four hours drive away, so getting hands on the N364 isn't going to happen any time soon!! :-(
Do any of the 8 function buttons change anything at all in the display, even in Play mode? If not, then there may by a fault with the buttons or their circuitry. It is worth remembering that for Program mode, the number of editable parameters depends on whether the Program is Single or Double mode i.e. uses one or two "oscillators". Double mode Programs e.g. C00 Sunrise, should allow access to the extra parameters.
. |
|
Back to top |
|
|
Booris
Joined: 20 Sep 2020 Posts: 8
|
Posted: Mon Sep 21, 2020 6:40 pm Post subject: |
|
|
yes... thank you.. I see.. about the dual mode, I already remember since 1996:)))))))) well, in my case, just sounds and programs are less functional for me..but MANY options in global mode, AND even more so the SEQUENCER-Yes, there is a need for a fully functional form.. all the same, I think-perhaps it is in the buttons can be the case.. they may be possibly of a more simplified design than necessary.. either during the repair was not picked up properly any loop and just "two shelves" of the menu were not involved.. when checking this, you may not have paid attention and happily spun everything back.. either during any transportation, something like this in terms of "contacts" fell off.. I made an agreement with the workshop here.. luck.. look.. perhaps really something from the " similar Opera"))))))) if you understand this " turn of speech")))))) |
|
Back to top |
|
|
Booris
Joined: 20 Sep 2020 Posts: 8
|
Posted: Mon Sep 21, 2020 6:45 pm Post subject: |
|
|
a.. this.. in the whole WORLD, only the TWO of us have this unit now in stock?? something more willing to speak on this topic there.. that's why I went to the English-language forum-it's more likely to pick up a person with a nearby device:))) but it seems that my magic move was not very successful:))))))))))))) |
|
Back to top |
|
|
Booris
Joined: 20 Sep 2020 Posts: 8
|
Posted: Mon Sep 21, 2020 6:52 pm Post subject: |
|
|
and anyway. international users are more disciplined.. this is where Russian users can soar the brain for weeks without saying anything in fact at all.. and ended up selling pillows and blankets in General.. and sitting on the forum out of boredom.. okay.. maybe some of the owners who have the unit next to them will appear.. |
|
Back to top |
|
|
slain_by_silence
Joined: 13 Oct 2015 Posts: 13
|
Posted: Sat Dec 05, 2020 9:34 pm Post subject: |
|
|
Hi,
[only the TWO of us have this unit now in stock?]
Nope, I still have 3 of them in the attic (1 x N364 + 2 x N264).
Did you resolve your problem?
Maybe I can check for you. Which parameters do you want to edit/change?
Your available options/menu screens depend whether a program or a combi bank is selected.
For example select a combi use cursor up down to navigate through available options (effect placement, delay, effect type). Pressing the left buttons 1-8 (without edit) will just select the corresponding timbres (Programs) of the Combi.
In Program Edit Mode the Buttons 1-8 lead you to the function/screens according to their label.
Don't know if this helps. If not let me know what you're trying to achieve exactly. |
|
Back to top |
|
|
|