Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Using Korg PadKontrol with microstation

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg microSTATION.
View previous topic :: View next topic  
Author Message
MarjolinosT



Joined: 03 Apr 2019
Posts: 4

PostPosted: Fri Mar 27, 2020 5:50 pm    Post subject: Using Korg PadKontrol with microstation Reply with quote

Hello,

I've tried to connect the Korg PadKontrol to the microstation, to play beats-sounds on board of the microstation with the pads of the PadKontrol.

I've connected a single midi cable to the 'midi out' of the padkontrol en to the 'midi in' of the microstation.

But I don't hear anything when I push the pads.

I've already tried:
- to change the midi channel of 1 pad to various channels. It didn't help (but maybe because I did it with only one pad, in 1 'scene'?)
- to search for midi settings in the microstation, but I don't see relevant midi settings in the microstation. I did see something about 'external setup', but then a list appeared with a lot of gear (like the microkorg, minimogue, even FL studio etc), but not the padKontrol.

Does anyone know how I can manage this?

It shouldn't be to hard right? Both Korg devices, both midi compatible!
Back to top
View user's profile Send private message
arpegiator1
Junior Member


Joined: 31 Aug 2017
Posts: 86
Location: Czech republic

PostPosted: Sat Mar 28, 2020 11:13 pm    Post subject: Re: Using Korg PadKontrol with microstation Reply with quote

external setup works upside down - Microstation controls the machyne. This does not affect it.
There is link of operation guite
https://www.korg.com/us/support/download/manual/0/87/1875/
page 13 - 14
Maybe it will help you
_________________
renehybsman@seznam.cz
workstation Korg microSTATION, Korg Kaossilator Pro+, looper Roland Boss RC-505, compressor Behringer Autocom PRO-XL, Mix pult - EZ-m 16x2, Combo Laney LA20C, Ableton Live 7, Reason 12
Back to top
View user's profile Send private message Send e-mail
Scott
Platinum Member


Joined: 16 Oct 2009
Posts: 1013

PostPosted: Wed Jan 26, 2022 9:43 pm    Post subject: Re: Using Korg PadKontrol with microstation Reply with quote

arpegiator1 wrote:
external setup works upside down - Microstation controls the machyne. This does not affect it.
There is link of operation guite
https://www.korg.com/us/support/download/manual/0/87/1875/
page 13 - 14
Maybe it will help you

Ir works in both directions. See page 14, "Controlling microSTATION’s tone
generator from an external MIDI device" -- it should work to do what the OP wants, as long as the pad is sends--on the appropriate channel--a MIDI instruction that corresponds to the desired function. For drum sounds, my guess is that you'd probably load a drum sound into a combi, probably asisgn it to channel 10 (the typical channel for drum parts), and then set the pads to trigger the notes that correspond to the desired drum sounds on channel 10.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg microSTATION. All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group