|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
indigochild
Joined: 01 Sep 2019 Posts: 5
|
Posted: Sun Sep 01, 2019 11:32 pm Post subject: Receive audio and MIDI from iPad and MacBook simultaneously |
|
|
Hello everyone!
I've been trying to get this setup for my Kronos2 88 working for a while now, I could really do with some guidance.
In descending order of preference, this is what I wish to achieve:
1. Receive both audio and MIDI from both iPad and MacBook
2. Receive both audio and MIDI from iPad, and just audio from MacBook
I've seen various posts where they recommend getting an active (aka powered) USB hub and then connecting all my devices to it, but I can't find any USB hub whose input can go into Kronos' USB-B port. If I connect the hub to Kronos' USB-A port - or if I connect the devices directly to the USB-A for that matter - neither the iPad nor the MacBook recognizes Kronos as a MIDI/audio device.
The setup has to necessarily be wired, and lesser the number of cables/devices, the better. Where do I begin?
Thanks! |
|
Back to top |
|
|
psionic311 Platinum Member
Joined: 14 Nov 2014 Posts: 1046 Location: Orlando, Florida USA
|
Posted: Mon Sep 02, 2019 1:10 am Post subject: |
|
|
Hi, here's one possible way:
Connect iPad directly to Kronos USB.
- provides audio and MIDI
- need CCK
Connect MacBook directly to Kronos Audio IN*
- use Mac's headphone jack
- use 1/8" to split 1/4" audio cable
Then connect MacBook and iPad to same wireless network.
- Now you can use Network MIDI from iPad to Mac |
|
Back to top |
|
|
psionic311 Platinum Member
Joined: 14 Nov 2014 Posts: 1046 Location: Orlando, Florida USA
|
Posted: Mon Sep 02, 2019 2:11 am Post subject: |
|
|
Also, here's a fresh idea I have yet to verify myself:
Connect MacBook SPDIF out to Kronos SPDIF IN
- use MacBook "headphone" jack
- on some models, this doubles as SPDIF jack
- use SPDIF cable |
|
Back to top |
|
|
indigochild
Joined: 01 Sep 2019 Posts: 5
|
Posted: Mon Sep 02, 2019 4:23 am Post subject: |
|
|
psionic311 wrote: | Hi, here's one possible way:
Connect iPad directly to Kronos USB.
- provides audio and MIDI
- need CCK
Connect MacBook directly to Kronos Audio IN*
- use Mac's headphone jack
- use 1/8" to split 1/4" audio cable
Then connect MacBook and iPad to same wireless network.
- Now you can use Network MIDI from iPad to Mac |
I assumed taking headphones out from the MacBook to feed it into 1/4" Kronos input was out of the equation 'cause there'll be a drop in audio quality. Come to think of it, I should test this hypothesis. On the bright side, the new iPad has a USB-C port so I don't need an Apple Camera Connection Kit (CCK), I can connect it directly using a USB-B to USB-C cable like this one.
psionic311 wrote: | Also, here's a fresh idea I have yet to verify myself:
Connect MacBook SPDIF out to Kronos SPDIF IN
- use MacBook "headphone" jack
- on some models, this doubles as SPDIF jack
- use SPDIF cable |
Turns out, Apple stopped providing SPDIF output from my MacBook model onwards, lol.
I appreciate the quick response, thanks @psionic331! I ended up sending audio from MacBook to my RME Babyface Pro over USB, and then sent SPDIF from Babyface to Kronos. I've achieved my setup, I guess. |
|
Back to top |
|
|
psionic311 Platinum Member
Joined: 14 Nov 2014 Posts: 1046 Location: Orlando, Florida USA
|
Posted: Mon Sep 02, 2019 4:53 am Post subject: |
|
|
Good to hear, not many have used SPDIF.
Looks like you saved on $$$ and headache.
My MacBook is from 2011, so I still hold out hope.
I'm still happy OTB, but eventually I'll drift over to ITB. |
|
Back to top |
|
|
roundand
Joined: 27 Apr 2014 Posts: 16
|
Posted: Mon Sep 02, 2019 5:11 am Post subject: |
|
|
Is there a particular reason for you wanting to run the audio of the Mac through the Kronos? If you wanted to do it the other way round, things would be easier.
As for the midi: connect the iPad directly to the Mac, activate it in the audio midi setup and route everything in your software e.g. mainstage.
What is it specifically that you‘re trying to achieve? _________________ Korg Kronos X 88, Arturia Keylab 61, Roland V-Synth, Yamaha MM8, iPad Air 2 (various apps including e.g. Animoog) Alesis Vortex Wireless Keytar, MacBook Pro late 2016 15'' (Logic Pro X, MainStage 3Ableton Live 9 Suite, various plug-ins including e.g. Omnisphere) |
|
Back to top |
|
|
indigochild
Joined: 01 Sep 2019 Posts: 5
|
Posted: Mon Sep 02, 2019 5:36 am Post subject: |
|
|
roundand wrote: | Is there a particular reason for you wanting to run the audio of the Mac through the Kronos? If you wanted to do it the other way round, things would be easier.
As for the midi: connect the iPad directly to the Mac, activate it in the audio midi setup and route everything in your software e.g. mainstage.
What is it specifically that you‘re trying to achieve? |
I've a Roli Seaboard RISE 49, and the DAW (I use Equator) is on my MacBook, which is why I need audio in from the MacBook. MIDI in from the MacBook is not a mandatory requirement, it's just "meh, nice to have".
I've an iPad whose sheet music I want to scroll through (I use forScore) using my pedal, which is why I wanted MIDI in from the iPad. I also love GeoShred and its patches, which is why I wanted audio in from the iPad.
Right now, my present setup is:
* iPad to Kronos USB-B, this takes care of MIDI and audio in from the iPad
* Seaboard to MacBook over USB, MacBook to Babyface Pro over USB, Babyface to Kronos over SPDIF, this takes care of audio in from the MacBook
* Headphones out from Kronos
I did consider aggregating all audio/MIDI towards the MacBook, however, unlike my iPad, my laptop is not always by the keyboard. If I aggregate it all towards Kronos, even if I take my laptop away, I can still scroll through sheet music on the iPad without rewiring. That's why I want my iPad connected directly to the Kronos. I hope I'm making sense. |
|
Back to top |
|
|
roundand
Joined: 27 Apr 2014 Posts: 16
|
Posted: Mon Sep 02, 2019 5:51 am Post subject: |
|
|
That m,akes sense. I have a similar setup, including the Seaboard, but I run both the Kronos and everything Mac-related through a mixer. Have you taken a look at the iconnect devices by iconnectivity?
indigochild wrote: | roundand wrote: | Is there a particular reason for you wanting to run the audio of the Mac through the Kronos? If you wanted to do it the other way round, things would be easier.
As for the midi: connect the iPad directly to the Mac, activate it in the audio midi setup and route everything in your software e.g. mainstage.
What is it specifically that you‘re trying to achieve? |
I've a Roli Seaboard RISE 49, and the DAW (I use Equator) is on my MacBook, which is why I need audio in from the MacBook. MIDI in from the MacBook is not a mandatory requirement, it's just "meh, nice to have".
I've an iPad whose sheet music I want to scroll through (I use forScore) using my pedal, which is why I wanted MIDI in from the iPad. I also love GeoShred and its patches, which is why I wanted audio in from the iPad.
Right now, my present setup is:
* iPad to Kronos USB-B, this takes care of MIDI and audio in from the iPad
* Seaboard to MacBook over USB, MacBook to Babyface Pro over USB, Babyface to Kronos over SPDIF, this takes care of audio in from the MacBook
* Headphones out from Kronos
I did consider aggregating all audio/MIDI towards the MacBook, however, unlike my iPad, my laptop is not always by the keyboard. If I aggregate it all towards Kronos, even if I take my laptop away, I can still scroll through sheet music on the iPad without rewiring. That's why I want my iPad connected directly to the Kronos. I hope I'm making sense. |
_________________ Korg Kronos X 88, Arturia Keylab 61, Roland V-Synth, Yamaha MM8, iPad Air 2 (various apps including e.g. Animoog) Alesis Vortex Wireless Keytar, MacBook Pro late 2016 15'' (Logic Pro X, MainStage 3Ableton Live 9 Suite, various plug-ins including e.g. Omnisphere) |
|
Back to top |
|
|
Hector Space Junior Member
Joined: 10 Mar 2019 Posts: 87 Location: Glastonbury UK
|
Posted: Mon Sep 02, 2019 10:38 am Post subject: |
|
|
I’m using a cheap usb hub connected to one of the Kronos’s A type USB ports. This enables me to connect a usb midi keyboard, a usb computer keyboard, a midisport 2x2 and thumb drive all at once. No problems.
As others have said above, if you want to connect an iOS device, Mac or PC you’ll need to use the B type USB port on the Kronos. This is because these devices insist on being the HOST in a USB setup.
As above: To use an iOS device you’ll also need a camera connection kit (dongle). This miraculously turns the iPad usb into a HOST.
USB is a tedious standard that was never designed for networking topology. Ethernet UTP would have been much better for this type of setup and could even have provided power. But hey that's history!
I’ve found WiFi midi is fraught with latency issues. I suppose there's modern Bluetooth.. which is supposed to be tighter on timing for midi. Current iPads support this. |
|
Back to top |
|
|
indigochild
Joined: 01 Sep 2019 Posts: 5
|
Posted: Tue Sep 03, 2019 4:56 am Post subject: |
|
|
roundand wrote: | That m,akes sense. I have a similar setup, including the Seaboard, but I run both the Kronos and everything Mac-related through a mixer. Have you taken a look at the iconnect devices by iconnectivity?
indigochild wrote: | roundand wrote: | Is there a particular reason for you wanting to run the audio of the Mac through the Kronos? If you wanted to do it the other way round, things would be easier.
As for the midi: connect the iPad directly to the Mac, activate it in the audio midi setup and route everything in your software e.g. mainstage.
What is it specifically that you‘re trying to achieve? |
I've a Roli Seaboard RISE 49, and the DAW (I use Equator) is on my MacBook, which is why I need audio in from the MacBook. MIDI in from the MacBook is not a mandatory requirement, it's just "meh, nice to have".
I've an iPad whose sheet music I want to scroll through (I use forScore) using my pedal, which is why I wanted MIDI in from the iPad. I also love GeoShred and its patches, which is why I wanted audio in from the iPad.
Right now, my present setup is:
* iPad to Kronos USB-B, this takes care of MIDI and audio in from the iPad
* Seaboard to MacBook over USB, MacBook to Babyface Pro over USB, Babyface to Kronos over SPDIF, this takes care of audio in from the MacBook
* Headphones out from Kronos
I did consider aggregating all audio/MIDI towards the MacBook, however, unlike my iPad, my laptop is not always by the keyboard. If I aggregate it all towards Kronos, even if I take my laptop away, I can still scroll through sheet music on the iPad without rewiring. That's why I want my iPad connected directly to the Kronos. I hope I'm making sense. |
|
I hadn't heard of the iConnect product line, I just checked them out. As far as features go, I'm pretty happy with my Babyface Pro, mostly because it can be USB-powered and supports SPDIF. A friend suggested that I route everything to it and take headphones out from there instead of Kronos, which is a great idea.
Hector Space wrote: | I’m using a cheap usb hub connected to one of the Kronos’s A type USB ports. This enables me to connect a usb midi keyboard, a usb computer keyboard, a midisport 2x2 and thumb drive all at once. No problems.
As others have said above, if you want to connect an iOS device, Mac or PC you’ll need to use the B type USB port on the Kronos. This is because these devices insist on being the HOST in a USB setup.
As above: To use an iOS device you’ll also need a camera connection kit (dongle). This miraculously turns the iPad usb into a HOST.
USB is a tedious standard that was never designed for networking topology. Ethernet UTP would have been much better for this type of setup and could even have provided power. But hey that's history!
I’ve found WiFi midi is fraught with latency issues. I suppose there's modern Bluetooth.. which is supposed to be tighter on timing for midi. Current iPads support this. |
So that's why connecting to the USB-A port doesn't work, TIL! |
|
Back to top |
|
|
roundand
Joined: 27 Apr 2014 Posts: 16
|
Posted: Tue Sep 03, 2019 6:05 am Post subject: |
|
|
indigochild wrote: |
I did consider aggregating all audio/MIDI towards the MacBook, however, unlike my iPad, my laptop is not always by the keyboard. If I aggregate it all towards Kronos, even if I take my laptop away, I can still scroll through sheet music on the iPad without rewiring. That's why I want my iPad connected directly to the Kronos. I hope I'm making sense. |
indigochild wrote: |
I hadn't heard of the iConnect product line, I just checked them out. As far as features go, I'm pretty happy with my Babyface Pro, mostly because it can be USB-powered and supports SPDIF. A friend suggested that I route everything to it and take headphones out from there instead of Kronos, which is a great idea.
|
Well, routing everything through the Mac is the best solution imho. However, I thought you wanted a setup with which you could do without the Mac. I'm not sure whether the Babyface audio interface work in standalone, I don't think so. The iConnect interfaces work standalone, as far as I remember. _________________ Korg Kronos X 88, Arturia Keylab 61, Roland V-Synth, Yamaha MM8, iPad Air 2 (various apps including e.g. Animoog) Alesis Vortex Wireless Keytar, MacBook Pro late 2016 15'' (Logic Pro X, MainStage 3Ableton Live 9 Suite, various plug-ins including e.g. Omnisphere) |
|
Back to top |
|
|
indigochild
Joined: 01 Sep 2019 Posts: 5
|
Posted: Wed Sep 04, 2019 5:22 am Post subject: |
|
|
roundand wrote: | indigochild wrote: |
I did consider aggregating all audio/MIDI towards the MacBook, however, unlike my iPad, my laptop is not always by the keyboard. If I aggregate it all towards Kronos, even if I take my laptop away, I can still scroll through sheet music on the iPad without rewiring. That's why I want my iPad connected directly to the Kronos. I hope I'm making sense. |
indigochild wrote: |
I hadn't heard of the iConnect product line, I just checked them out. As far as features go, I'm pretty happy with my Babyface Pro, mostly because it can be USB-powered and supports SPDIF. A friend suggested that I route everything to it and take headphones out from there instead of Kronos, which is a great idea.
|
Well, routing everything through the Mac is the best solution imho. However, I thought you wanted a setup with which you could do without the Mac. I'm not sure whether the Babyface audio interface work in standalone, I don't think so. The iConnect interfaces work standalone, as far as I remember. |
Given my setup - 'cause I connected the iPad to the Kronos - I won't be needing Babyface if I don't have the MacBook, so it's okay. That being said, yes, Babyface Pro does have standalone mode. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|