View previous topic :: View next topic |
Author |
Message |
bazic Junior Member
Joined: 18 Jan 2018 Posts: 70
|
Posted: Wed Aug 28, 2019 5:02 pm Post subject: Sustain pedal doesn't work on Sequencer |
|
|
I record,let's say piano on sequencer, and of course play sustain pedal with it, but when I play back the recording, there is no sustain,and it sounds as if I recorded without it. I tried updating the Kronos to the latest version, but the problem is still there. I'm probably missing out on something. My pedal is Korg DS-1H. |
|
Back to top |
|
|
HardSync Platinum Member
Joined: 07 Jan 2011 Posts: 794
|
Posted: Wed Aug 28, 2019 5:28 pm Post subject: |
|
|
I see you've had this problem for almost a year now....?!! http://www.korgforums.com/forum/phpBB2/viewtopic.php?p=758616
Reading the previous topic you made about it and the advice given, your settings, etc., I really can't think of what could be causing that. If the damper works normally it should also record. So I guess the question I have for you is this: Are you able to record other CC data, like the joystick pitch bend/modulation or knobs? Is it only the damper CC#64 not being recorded? |
|
Back to top |
|
|
bazic Junior Member
Joined: 18 Jan 2018 Posts: 70
|
Posted: Wed Aug 28, 2019 5:56 pm Post subject: |
|
|
You're right, none of the controllers work.. pitch bender, knobs... none of it works. |
|
Back to top |
|
|
HardSync Platinum Member
Joined: 07 Jan 2011 Posts: 794
|
Posted: Wed Aug 28, 2019 5:57 pm Post subject: |
|
|
OK. Just did a test on my M3 and was able to reproduce this. I think I might know what's causing this.
Go to Global P1 MIDI. In the top right corner, is Enable Control Change checked? If not, turn it on. Make sure to save this change permanently by executing the Write Global Setting command from the menu. |
|
Back to top |
|
|
bazic Junior Member
Joined: 18 Jan 2018 Posts: 70
|
Posted: Wed Aug 28, 2019 6:38 pm Post subject: |
|
|
I honestly love you so much!! Hahahhahah
Finally, thanks for helping, you don't even know how happy I am to fix this. Thank you thank you thank you! |
|
Back to top |
|
|
HardSync Platinum Member
Joined: 07 Jan 2011 Posts: 794
|
Posted: Wed Aug 28, 2019 6:42 pm Post subject: |
|
|
You're welcome. :) I wish this could have been sorted out for you last year, but glad it's working now. |
|
Back to top |
|
|
|