View previous topic :: View next topic |
Author |
Message |
stewehh
Joined: 29 Jul 2015 Posts: 2 Location: Hamburg Germany
|
Posted: Wed Jul 29, 2015 5:43 pm Post subject: header validation failure - file possibly corrupt |
|
|
Hi there.
I use an WIN-XP and WIN7. Both work perfect with Kevin Goodmann Trinito and my TR-Rack.
Only Problem - I cannot open any downloaded *.PCG as always the above mentionend file error appears.
Taking my onboard sysex to trinito shows no problem, working on the sounds and bringing them back to the unit - perfect ! BUT - and this p... me off - I cannot open any foreign files due the error message.
Any ideas to help me out |
|
Back to top |
|
|
skyler
Joined: 12 May 2014 Posts: 20 Location: Maryland United States
|
Posted: Wed Jul 29, 2015 7:11 pm Post subject: |
|
|
congratulations on getting trinitro to work im on windows 7 and never could get it to work for me , so im using sound diver v3.0.5
maybe i should try again
i dont know how to transfer sounds(pcg files) tho, sorry let us know how it works out for u |
|
Back to top |
|
|
michelkeijzers Approved Merchant
Joined: 08 Feb 2007 Posts: 9113 Location: Netherlands
|
Posted: Wed Jul 29, 2015 7:22 pm Post subject: |
|
|
Maybe you can try in PCG Tools if the type is correct (e.g. a Triton Extreme PCG file). _________________
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/ |
|
Back to top |
|
|
stewehh
Joined: 29 Jul 2015 Posts: 2 Location: Hamburg Germany
|
Posted: Sun Sep 13, 2015 7:41 pm Post subject: |
|
|
Hi and sorry for late reply. Had a surgery which was quiet nasty - however, still alive but same Korg problem.
I tried as followed:
- opened a file from the internet with several editors - worked, but cannot open these in Trinito
-- opened my file from my TR-rack with these editors - not working (header failure) but works with Trinito
--- opened both files with PCG Tools - both working.
However, think I found the failure.
The internet files are allocated to : Studio Rack
My files from my TR integrated with Kevin Goodman Trinto have the allocation: Trinity V2
An image to these different allocations are to be found here:
https://www.dropbox.com/s/k3ld22drvpd0cdi/tr_pcg.jpg?dl=0
Any ideas how to fix this, so that I can upload the internet files to my TR.
Thanks for help |
|
Back to top |
|
|
Korgious
Joined: 01 Nov 2016 Posts: 2
|
Posted: Tue Nov 01, 2016 8:42 am Post subject: Trinitro access code violation |
|
|
Greetings from Athens Greece
Win 7 32bit.
Trinitro is installed...and the I have a continuous message appears..access violation code 00006....
Is there any solution for this?
2. I am tyring to use PCG Tools. It works fine..but when I generate any selection...nothing happens.
I use Korg tr rack...after 15 years...and I feel newbie.
Finally, where the new pcg install in Tr rack?
Thank you in advance |
|
Back to top |
|
|
michelkeijzers Approved Merchant
Joined: 08 Feb 2007 Posts: 9113 Location: Netherlands
|
Posted: Tue Nov 01, 2016 8:21 pm Post subject: Re: Trinitro access code violation |
|
|
Korgious wrote: | Greetings from Athens Greece
Win 7 32bit.
2. I am tyring to use PCG Tools. It works fine..but when I generate any selection...nothing happens.
|
What exactly you mean with 'generate any selection'? _________________
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/ |
|
Back to top |
|
|
kirikl
Joined: 11 Dec 2018 Posts: 11
|
Posted: Sun Jan 06, 2019 7:40 pm Post subject: |
|
|
Nor wrote: | Why do I get this error message after several use of Trinitro?
access violation at address 00000006. read address of address 00000006.
I run Windows 7 Ultimate. |
Because it is Windows 7. I get that too. So I switched to older laptop with XP.
Maybe you want to install XP if possible. |
|
Back to top |
|
|
bluebottle47
Joined: 04 Dec 2020 Posts: 1 Location: Dumfries, Scotland
|
Posted: Thu Dec 24, 2020 4:41 pm Post subject: Manager for Trinity in Win10? |
|
|
Does anyone know whether PCGTools (or anything else for that matter) would work in Win10? I'm too long in the tooth to battle with recalcitrant software!
I recently picked up a Trinity, thinking to use it as a MIDI controller, but have come to like it in its own right ... _________________ Trinity, Yamaha DX-7II, Roland G70, Roland RD700GX,Yamaha Motif ES8, Roland D550, Fender Rhodes Mk1 Stage 73, and lots of guitars and basses ... |
|
Back to top |
|
|
|