View previous topic :: View next topic |
Author |
Message |
ToneM
Joined: 31 Aug 2012 Posts: 38
|
Posted: Sun Mar 17, 2013 4:56 am Post subject: Microstation 1 or 2 cable outputs |
|
|
I currently run one cable from the left/mono output into my amp. Before I go out and buy another cable, I was wondering if putting another cable into the right output and into the 2nd. input of my amp will allow me hear the effects such as delays, chorus, etc. better. They sound fine with my headphones from the front headphone jack on the Ms but they don't sound that great with a single cable. Thanks! |
|
Back to top |
|
|
Volivovej volej
Joined: 07 Mar 2013 Posts: 14
|
Posted: Sun Mar 17, 2013 8:09 am Post subject: |
|
|
It will. By using both outputs, you'll get the standard stereo sound that you can hear from your headphones. |
|
Back to top |
|
|
michelkeijzers Approved Merchant
Joined: 08 Feb 2007 Posts: 9113 Location: Netherlands
|
Posted: Sun Mar 17, 2013 2:40 pm Post subject: |
|
|
It depends if your amp is stereo and output to (at least) two channels (left/right).
When using one output (I think the left one), most Korg workstations automatically mix the L/R to a mono signal and output it to the Left channel. _________________
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/ |
|
Back to top |
|
|
ToneM
Joined: 31 Aug 2012 Posts: 38
|
Posted: Sun Mar 17, 2013 10:51 pm Post subject: |
|
|
Thank's Volivovej. I will pick an extra cable!
Volivovej volej wrote: | It will. By using both outputs, you'll get the standard stereo sound that you can hear from your headphones. |
|
|
Back to top |
|
|
ToneM
Joined: 31 Aug 2012 Posts: 38
|
Posted: Sun Mar 17, 2013 10:53 pm Post subject: |
|
|
Thanks Michel, not sure if my amp is stereo, probably not but it has two inputs with separate volume controls so I'm going to give it a try.
michelkeijzers wrote: | It depends if your amp is stereo and output to (at least) two channels (left/right).
When using one output (I think the left one), most Korg workstations automatically mix the L/R to a mono signal and output it to the Left channel. |
|
|
Back to top |
|
|
|