View previous topic :: View next topic |
Author |
Message |
jaykris
Joined: 03 Apr 2012 Posts: 1
|
Posted: Tue Apr 03, 2012 5:51 pm Post subject: Please help - Trinity V3 |
|
|
I recently bought a Trinity 88key version. I also own a 61key version. The person that I bought it from says the sequencer was working fine. However, when I switch to sequencer mode, start/stop won't lit up when pressed and won't play the songs that I loaded from the other trinity. I believe it could be because of dust. Any tips to troubleshoot it? Thanks a lot |
|
Back to top |
|
|
Timo Platinum Member
Joined: 24 Jan 2002 Posts: 3109 Location: Kaoss central, England
|
|
Back to top |
|
|
synthjoe Platinum Member
Joined: 21 Apr 2010 Posts: 1011
|
Posted: Tue Apr 03, 2012 8:35 pm Post subject: |
|
|
If the LED does not indicate play/stop on the key, then it might be a somewhat more serious problem, but probably fixable (although some fine soldering skills might be required).
Me too, I'd suggest you to have a look inside, check also for water or other liquid damage - sometimes residues of spilled soft drinks might eat up the traces on the PCB. |
|
Back to top |
|
|
variant966
Joined: 22 Aug 2011 Posts: 23 Location: Russia
|
Posted: Fri Apr 06, 2012 4:26 am Post subject: |
|
|
Most likely - the replacement buttons! I changed all 37 buttons... |
|
Back to top |
|
|
|