| View previous topic :: View next topic |
| Author |
Message |
headcover
Joined: 10 Sep 2011
Posts: 5
|
 Posted: Sun Oct 16, 2011 6:47 pm Post subject: Controll Triton rack with Kronos |
 |
|
I've got a question about program change.
I don't know if it's possible but when I play the first patch in setlist mode on my Kronos and then I switch to the next patch the rack is changing from combi A-000 to A-001, but in this case I want the rack to go from A-000 to B-005 ?
My question is how do I program the Kronos/rack for this task?
Thanks! |
|
| Back to top |
|
 |
michelkeijzers
Approved Merchant
Joined: 08 Feb 2007
Posts: 9113
Location: Netherlands
|
| Posted: Sun Oct 16, 2011 7:28 pm Post subject: |
|
|
I never tried it myself, but I think you have to make a combi, set one timbre to EXT or EX2 and then you can set somewhere in the timbre the bank and program number to be sent by MIDI. Use as MIDI channel the channel of the slave (rack).
_________________
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/ |
|
| Back to top |
|
|
headcover
Joined: 10 Sep 2011
Posts: 5
|
| Posted: Sun Oct 16, 2011 8:02 pm Post subject: |
|
|
Thanks!
I tried to set the timbre to EXT 2 and program 006 but I don't know what numbers I should set in MSB/LSB ?
The rack still just go from A 000 to A 001. |
|
| Back to top |
|
|
michelkeijzers
Approved Merchant
Joined: 08 Feb 2007
Posts: 9113
Location: Netherlands
|
| Posted: Sun Oct 16, 2011 8:14 pm Post subject: |
|
|
I would assume MSB is the bank number (so that would be 1 for B) and LSB for index (0-127).
But if you want to be sure, select 3 or 4 and some strange number for index to see if it jumps to another location than A000 or A001.
_________________
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/ |
|
| Back to top |
|
|
MarPabl
Platinum Member
Joined: 24 Sep 2011
Posts: 938
Location: MX
|
| Posted: Mon Oct 17, 2011 4:20 am Post subject: |
|
|
| headcover wrote: | I tried to set the timbre to EXT 2 and program 006 but I don't know what numbers I should set in MSB/LSB ?
The rack still just go from A 000 to A 001. |
You have to check MIDI implementation chart for the Triton Rack in order for you to know how to map the banks to MSB/LSB. Hope you have access to the documentation or try to download it 
_________________
Current gear:  Access Virus TI2 Whiteout Keyboard (111/150), Access Virus TI2 Polar DarkStar Special Edition, Gibson Custom Lite 2013, Roland MV-8800  |
|
| Back to top |
|
|
Rosen Sound
Approved Merchant
Joined: 06 Jan 2010
Posts: 1056
Location: Los Angeles, California
|
| Posted: Mon Oct 17, 2011 4:31 am Post subject: |
|
|
urgh.. if its a korg to korg connection you dont need to use EXT2. just use EXT. both kronos and triton use the same bank mapping.
Say you have a combi that you want ot control the triton rack with
Timbre 1 - set to ext
change it to the midi channel that the triton rack receives on. It will have to be different then the kronos!!!!!!!!!!!!!
change the bank number and letter accordingly.
bam
_________________
Current gear: Korg Kronos 61, Oberheim OB-8, Alesis Vortex
Past Gear: Triton Extreme w/moss & ram, Korg Radias, Kurzweil Micropiano, Triton classic, & Karma
Come visit my Burbank California repair shop/recording studio! Rosensound.com
And my band: Sirion.us.com |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
