View previous topic :: View next topic |
Author |
Message |
Amystika
Joined: 16 Apr 2007 Posts: 45
|
Posted: Mon Dec 28, 2009 9:05 pm Post subject: Need help saving realtime controls PLEASEE! |
|
|
So I just acquired my korg m50 for christmas, and it has already become my favorite board.
Anyways, my question is... when I am editing my patches and saving them, its not saving my edits to the real time controls, can anyone please tell me how I do this?
Thank you very much! |
|
Back to top |
|
|
runeharpun Full Member
Joined: 11 Jan 2009 Posts: 208 Location: Norway
|
Posted: Mon Dec 28, 2009 10:44 pm Post subject: |
|
|
I don't think it's possible. It seems like all controls (including all CC values) are reset when the combis are saved. It would open up new options if one could make an exact snapshot of the values.
R |
|
Back to top |
|
|
Synastikki Senior Member
Joined: 13 Jun 2006 Posts: 440 Location: Finland
|
Posted: Mon Dec 28, 2009 10:59 pm Post subject: |
|
|
unfortunately only way to save these changes is to check what each knob is doing and going to the menus and changing the parameters the same way they change when you tweak a knob (for example if you are tweaking the cutoff knob you must go to the menus and change the cutoff to match the position of the knob...) _________________ Korg Triton Classic 61-keys, Native Instruments Kore 2 (SW&HW) |
|
Back to top |
|
|
Amystika
Joined: 16 Apr 2007 Posts: 45
|
Posted: Mon Dec 28, 2009 11:40 pm Post subject: asdf |
|
|
So than basically, the realtime knobs are just a realtime way to tweak the internal sound of the patch?
Therefore, I can get the sound that I had by tweaking the realtime, by going further into the patch and editing? |
|
Back to top |
|
|
X-Trade Moderator
Joined: 14 Feb 2006 Posts: 6494 Location: Leeds, UK
|
Posted: Tue Dec 29, 2009 12:19 am Post subject: |
|
|
Yes, in Program mode the realtime knobs are just temporary overrides for parameters or groups of parameters in the program (for mode A).
for the assignables, they can be routed to any number of controls which may be routed to actual parameters via AMS, or affecting a parameter or group of parameters like the A mode - e.g. cutoff, release, resonance, etc.
The program edit pages contain the entire program settings, so there isn't anything missed out - that covers everything. the realtime knobs are just a few assignments to select parameters or acting as modulation sources in there. _________________ Current Gear: Kronos 61, RADIAS-R, Volca Bass, ESX-1, microKorg, MS2000B, R3, Kaossilator Pro +, MiniKP, AX3000B, nanoKontrol, nanoPad MK II,
Other Mfgrs: Moog Sub37, Roland Boutique JX03, Novation MiniNova, Akai APC40, MOTU MIDI TimePiece 2, ART Pro VLA, Focusrite Saffire Pro 40.
Past Gear: Korg Karma, TR61, Poly800, EA-1, ER-1, ES-1, Kawai K1, Novation ReMote37SL, Boss GT-6B
Software: NI Komplete 10 Ultimate, Arturia V Collection, Ableton Live 9. Apple OSX El Capitan on 15" MacBook Pro
Last edited by X-Trade on Tue Dec 29, 2009 12:20 am; edited 1 time in total |
|
Back to top |
|
|
outsider9 Full Member
Joined: 29 Aug 2009 Posts: 110 Location: Uruguay
|
Posted: Tue Dec 29, 2009 12:19 am Post subject: |
|
|
It's possible to save those tweaks on SEQ mode, maybe enabling 'Sysex' on the save menu could be needed (not sure). You have to record tweaks in SEQ mode and that information (program settings, CC events, etc.) is saved on the SEQ file. Pretty sure it works that way. |
|
Back to top |
|
|
Synastikki Senior Member
Joined: 13 Jun 2006 Posts: 440 Location: Finland
|
Posted: Tue Dec 29, 2009 7:47 am Post subject: |
|
|
Knob movements are saved in the sequencer mode but you must be recording the sequence so that the knob movements are saved... _________________ Korg Triton Classic 61-keys, Native Instruments Kore 2 (SW&HW) |
|
Back to top |
|
|
kikedeolivos Platinum Member
Joined: 30 Jun 2009 Posts: 522
|
Posted: Tue Dec 29, 2009 1:01 pm Post subject: |
|
|
Re this issue, I would like to ask a question.
I've made a Combi, with 2 timbres. One of these plays in the upper octave (Mono Synth) and I would like the Joystick to act raising / decreasing (X-Y) a full octave, instead of 3 semitones: how can I achieve that?
Thanks _________________ Current gear
Korg M50 / Korg Nanokontrol 2
Past gear
Teisco Organ / Yamaha Electone / Casio CZ-230S / Casio CZ-3000 / Ensoniq ESQ 1 / Ensoniq SQ1 / Ensoniq SQ1 Plus / Ensoniq SD-1 /Yamaha PSR? / Hammond XM-1 / Roland RS9 / H&K Rotosphere / Yamaha S80 / Korg X5 / Kurzweil ME-1 / Korg X5D / Korg CX-3 (V2) / Hammond M111 & Leslie 147
Youtube channel
http://www.youtube.com/user/bubusdeolivos?feature=results_main |
|
Back to top |
|
|
Synastikki Senior Member
Joined: 13 Jun 2006 Posts: 440 Location: Finland
|
Posted: Tue Dec 29, 2009 1:22 pm Post subject: |
|
|
well the X-direction of the joystick is pretty easy to calibrate to +/- 1 octave... on the pitch page you can find dedicated values for this... but for Y-directions I'm not sure if it is possible to get both increase and decrease, but for one or the other is is the same page as the X-settings, but you'll have to use the AMS tab for this and put source JS +Y or JS -Y and value +12.00 or -12.00 (I'm a triton user but it should be pretty similar on M50) _________________ Korg Triton Classic 61-keys, Native Instruments Kore 2 (SW&HW) |
|
Back to top |
|
|
kikedeolivos Platinum Member
Joined: 30 Jun 2009 Posts: 522
|
Posted: Tue Dec 29, 2009 1:29 pm Post subject: |
|
|
Synastikki wrote: | well the X-direction of the joystick is pretty easy to calibrate to +/- 1 octave... on the pitch page you can find dedicated values for this... but for Y-directions I'm not sure if it is possible to get both increase and decrease, but for one or the other is is the same page as the X-settings, but you'll have to use the AMS tab for this and put source JS +Y or JS -Y and value +12.00 or -12.00 (I'm a triton user but it should be pretty similar on M50) |
I want this behavior in only one Combi, meaning, I don't want it to be Global:is That Pitch Page you are talking about on Page Select?
Thanks _________________ Current gear
Korg M50 / Korg Nanokontrol 2
Past gear
Teisco Organ / Yamaha Electone / Casio CZ-230S / Casio CZ-3000 / Ensoniq ESQ 1 / Ensoniq SQ1 / Ensoniq SQ1 Plus / Ensoniq SD-1 /Yamaha PSR? / Hammond XM-1 / Roland RS9 / H&K Rotosphere / Yamaha S80 / Korg X5 / Kurzweil ME-1 / Korg X5D / Korg CX-3 (V2) / Hammond M111 & Leslie 147
Youtube channel
http://www.youtube.com/user/bubusdeolivos?feature=results_main |
|
Back to top |
|
|
Synastikki Senior Member
Joined: 13 Jun 2006 Posts: 440 Location: Finland
|
Posted: Tue Dec 29, 2009 2:15 pm Post subject: |
|
|
Well on triton you can change the bend range on combi, Track parameters, pitch-tab.... not sure how it is on M50 though... _________________ Korg Triton Classic 61-keys, Native Instruments Kore 2 (SW&HW) |
|
Back to top |
|
|
kikedeolivos Platinum Member
Joined: 30 Jun 2009 Posts: 522
|
Posted: Tue Dec 29, 2009 2:42 pm Post subject: |
|
|
Synastikki wrote: | Well on triton you can change the bend range on combi, Track parameters, pitch-tab.... not sure how it is on M50 though... |
Found it: thanks. _________________ Current gear
Korg M50 / Korg Nanokontrol 2
Past gear
Teisco Organ / Yamaha Electone / Casio CZ-230S / Casio CZ-3000 / Ensoniq ESQ 1 / Ensoniq SQ1 / Ensoniq SQ1 Plus / Ensoniq SD-1 /Yamaha PSR? / Hammond XM-1 / Roland RS9 / H&K Rotosphere / Yamaha S80 / Korg X5 / Kurzweil ME-1 / Korg X5D / Korg CX-3 (V2) / Hammond M111 & Leslie 147
Youtube channel
http://www.youtube.com/user/bubusdeolivos?feature=results_main |
|
Back to top |
|
|
|