|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
3 fingers Junior Member
Joined: 30 Oct 2007 Posts: 62
|
Posted: Sun Mar 08, 2009 12:28 am Post subject: Re: NEC D431000ACZ-70L(L) |
|
|
The difference between the L and the LL SRAM is in the standby power. The LL runs on a fraction of the standby power and seems to be otherwise identical.
But what's the significance of the paper label with the "V - 4"?
If you get a PBS-TRI board and the SRAM from a different sources can you still make them work properly together?
sergiommms wrote: | I can now confirm that the double L version of the chip should work ok - I had that kind in my Trinity PRO that I recently sold.
So... I guess both NEC D431000ACZ-70L and NEC D431000ACZ-70LL should do the job. What´s more, from what I gathered, the LL version is readily available from most electronic parts suppliers, as opposed to the single L version.
Photos of the "finding": |
|
|
Back to top |
|
|
pegnafroy Full Member
Joined: 19 Apr 2007 Posts: 201 Location: Penaflor, Santiago of Chile
|
Posted: Sun Mar 08, 2009 5:42 pm Post subject: |
|
|
Hi:
Jerry Kovarsky asked to one technician that work at Korg USA, and he say that both chips will work with the board.
Now, if any of us have seen a pbs without the chips, then you can buy for a fraction of the cost, since the board need those chips in order to load the factory patches and the flash roms new patches.
To the friend that have try the chips without the pbs board: i've just checked, the chips show me the extra banks without the pbs board. Now, i have the pbs board, and the last thing i think is that the pbs enable the extra bank. So if you put the pbs out of your keyboard, then you'll have the extra banks anyway.
Of course that is more fun have the pbs and the chips.
Desde Santiago de Chile.
Froilán _________________ http://www.490.cl/votar.php?v=85
Si no puedes contra ellos, cambia de vocalista... |
|
Back to top |
|
|
3 fingers Junior Member
Joined: 30 Oct 2007 Posts: 62
|
Posted: Sun Mar 08, 2009 7:25 pm Post subject: |
|
|
But why does one of the SRAM chips have a white label with a code on it is what I'd like to know? |
|
Back to top |
|
|
pegnafroy Full Member
Joined: 19 Apr 2007 Posts: 201 Location: Penaflor, Santiago of Chile
|
Posted: Mon Mar 09, 2009 7:37 pm Post subject: |
|
|
A sticker isn't a standard way to indicate an IC.
My chips doesn't have any sticker. The rule is what is painted on the plastic case.
So, doesn't matter.
Desde Santiago de Chile.
Froilán _________________ http://www.490.cl/votar.php?v=85
Si no puedes contra ellos, cambia de vocalista... |
|
Back to top |
|
|
galukalock
Joined: 24 Feb 2009 Posts: 7
|
Posted: Tue Mar 10, 2009 4:24 am Post subject: |
|
|
Good news everyone!
I found a PBS-TRI board on eBay, and I bought it. Hopefully we will find out how this works. I think that the PBS board enables the banks. _________________ Trinity Pro |
|
Back to top |
|
|
pegnafroy Full Member
Joined: 19 Apr 2007 Posts: 201 Location: Penaflor, Santiago of Chile
|
Posted: Tue Mar 10, 2009 6:28 pm Post subject: |
|
|
Hi:
Is a PBS without the chips???
So congratulations, don't matter if it enables the extra banks, you'll have 8MB for sample data.
Cheers.
Desde Santiago de Chile.
Froilán _________________ http://www.490.cl/votar.php?v=85
Si no puedes contra ellos, cambia de vocalista... |
|
Back to top |
|
|
galukalock
Joined: 24 Feb 2009 Posts: 7
|
Posted: Tue Mar 10, 2009 8:00 pm Post subject: |
|
|
It is a PBS with the chips. So, if my chips are bad, the others should work. _________________ Trinity Pro |
|
Back to top |
|
|
pegnafroy Full Member
Joined: 19 Apr 2007 Posts: 201 Location: Penaflor, Santiago of Chile
|
Posted: Wed Mar 11, 2009 2:44 pm Post subject: |
|
|
That's make sense. _________________ http://www.490.cl/votar.php?v=85
Si no puedes contra ellos, cambia de vocalista... |
|
Back to top |
|
|
3 fingers Junior Member
Joined: 30 Oct 2007 Posts: 62
|
Posted: Sat Mar 14, 2009 1:28 pm Post subject: |
|
|
galukalock wrote: | I found a PBS-TRI board on eBay, and I bought it. Hopefully we will find out how this works. I think that the PBS board enables the banks. |
I found one too and installed it this morning. I got the board and the SRAM from different sources. Installation is pretty simple as long as you pay attention and seat the parts in their sockets properly which takes a bit of care. At first I forgot that I needed to do a full reset before the PBS-TRI and SRAM will behave properly so when I powered it up, the Trinity kept freezing up on me when I'd press the Bank button. That was a scare but it's all good now.
Does anyone know if the TFD-1, 2, 3, and 4S files are available anywhere? They didn't come with the card so I'm not sure where to get them now. |
|
Back to top |
|
|
galukalock
Joined: 24 Feb 2009 Posts: 7
|
Posted: Sat Mar 14, 2009 4:43 pm Post subject: It works! |
|
|
I installed it just now. I had the same problem as 3 fingers until I did a reset.
Now I have extra room for sounds, finally.
@3 fingers: I think you may be able to find them on the bittorrent sites. I will look there myself later. _________________ Trinity Pro |
|
Back to top |
|
|
3 fingers Junior Member
Joined: 30 Oct 2007 Posts: 62
|
Posted: Sat Mar 14, 2009 6:51 pm Post subject: |
|
|
This adds a whole new dimension to an already awesome synth! |
|
Back to top |
|
|
pegnafroy Full Member
Joined: 19 Apr 2007 Posts: 201 Location: Penaflor, Santiago of Chile
|
Posted: Fri Mar 20, 2009 11:14 pm Post subject: |
|
|
3 fingers wrote: | galukalock wrote: | I found a PBS-TRI board on eBay, and I bought it. Hopefully we will find out how this works. I think that the PBS board enables the banks. |
I found one too and installed it this morning. I got the board and the SRAM from different sources. Installation is pretty simple as long as you pay attention and seat the parts in their sockets properly which takes a bit of care. At first I forgot that I needed to do a full reset before the PBS-TRI and SRAM will behave properly so when I powered it up, the Trinity kept freezing up on me when I'd press the Bank button. That was a scare but it's all good now.
Does anyone know if the TFD-1, 2, 3, and 4S files are available anywhere? They didn't come with the card so I'm not sure where to get them now. |
Hi:
http://www.ekomusicgroup.com/esound/pages/home.php
Do a search at download section. Keywords: trinity, pcm, tfd.
Desde Santiago de Chile.
Froilán _________________ http://www.490.cl/votar.php?v=85
Si no puedes contra ellos, cambia de vocalista... |
|
Back to top |
|
|
3 fingers Junior Member
Joined: 30 Oct 2007 Posts: 62
|
Posted: Sat Mar 21, 2009 7:43 am Post subject: |
|
|
Thanks Froilán!
pegnafroy wrote: | 3 fingers wrote: | galukalock wrote: | I found a PBS-TRI board on eBay, and I bought it. Hopefully we will find out how this works. I think that the PBS board enables the banks. |
I found one too and installed it this morning. I got the board and the SRAM from different sources. Installation is pretty simple as long as you pay attention and seat the parts in their sockets properly which takes a bit of care. At first I forgot that I needed to do a full reset before the PBS-TRI and SRAM will behave properly so when I powered it up, the Trinity kept freezing up on me when I'd press the Bank button. That was a scare but it's all good now.
Does anyone know if the TFD-1, 2, 3, and 4S files are available anywhere? They didn't come with the card so I'm not sure where to get them now. |
Hi:
http://www.ekomusicgroup.com/esound/pages/home.php
Do a search at download section. Keywords: trinity, pcm, tfd.
Desde Santiago de Chile.
Froilán |
|
|
Back to top |
|
|
zisidisnikos
Joined: 06 Oct 2008 Posts: 9
|
Posted: Thu May 21, 2009 1:55 pm Post subject: |
|
|
hi! i'm Nikos from Greece.
i buy this 2 sram chips only(NEC D431000ACZ-70L) for my trinity v3 for C&D bank and extra 64 preset to M Bank.
i waiting to pick(is ship from U.S to Greece).
but I want to ask:
when I should put the sram.. the first thing before open the power i do will be the reset? ie i open the power to on with the holding ENTER + 0 button with the disk in to the flopy(2 disk with OS 3xxx?
and install again the os Vesrsion 3.xxx? _________________ Korg trinity v3,orla organ Prestige61,korg 05r/w,yamaha A3,yamaha motif es7,*yamaha motif xs8,cubase 6.5 |
|
Back to top |
|
|
Timo Platinum Member
Joined: 24 Jan 2002 Posts: 3109 Location: Kaoss central, England
|
Posted: Thu May 21, 2009 2:22 pm Post subject: |
|
|
zisidisnikos wrote: | hi! i'm Nikos from Greece.
i buy this 2 sram chips only(NEC D431000ACZ-70L) for my trinity v3 for C&D bank and extra 64 preset to M Bank.
i waiting to pick(is ship from U.S to Greece).
but I want to ask:
when I should put the sram.. the first thing before open the power i do will be the reset? ie i open the power to on with the holding ENTER + 0 button with the disk in to the flopy(2 disk with OS 3xxx?
and install again the os Vesrsion 3.xxx? |
First of all, save everything to floppy disk, all of your PCG data, as you will lose it by doing a factory reset.
Shut down the Trinity, unplug from the mains electrics. Open up the Trinity, ground yourself and the Trinity by briefly touching an earth connection (such as a radiator in your home, if they are earthed). Carefully (and I mean REALLY carefully - those legs are too easily bent) insert the chips into the Trinity's motherboard in the correct orientation (with the indent on each chip pointing inwards).
Close up the Trinity, and hold Enter + 0 when you switch it on. This will wipe the Trinity's memory. You do not have to re-install OS v3.xxx again.
Then take a look to see if you have C & D banks.
As mentioned, if you don't have the PBS board, I'm not sure if the chips will work alone, but it's worth a try. _________________ [Free Moss Set For All Workstations With Moss Expansion]
[Infekted.org - Original Access Virus Forum & Community]
Trinity V3 PBS | Radias KB | Virus TI Snow | Virus Indigo 1 | 505 Groovebox |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|