Korg Forums

Lins · Joined: 16 Jan 2009 Posts: 6

On my N364 sequencer display the Track number sticks. The slider and up/down keys work on everything else, but the Track number stubbornly refuses to move. I switch off/on and it may (or may not) work.
Frustrating!!!
Any suggestions?

Sharp · Posted: Fri Jan 16, 2009 11:48 am Post subject:

The likely cause is that your using a Damper Pedal made by someone other than KORG.

Regards.
Sharp.
_________________

Lins · Joined: 16 Jan 2009 Posts: 6

Sharp · Posted: Sat Jan 17, 2009 3:58 pm Post subject:

Nope, it can only be related to you using the wrong damper pedal, or if your not using any and you have the polarity set to use a non KORG pedal.

So try reverse the polarity back to the normal KORG format.

Regards.
Sharp.
_________________

Lins · Joined: 16 Jan 2009 Posts: 6

I played with the pedal polarity some more and it seems to be working - I guess you're right, Sharp. Thanks.

Sharp · Posted: Tue Jan 20, 2009 1:22 am Post subject:

Glad to hear it. Sounds Good

Regards.
Sharp.
_________________