Korg Forums

redkeys88 · Posted: Mon Mar 10, 2008 4:56 pm Post subject: Style to PC - PA50

I would like to get the COPLA style in my PA50 over to my PC so I can transfer to my PA500. According to the manual, you connect the MIDI cables from PA50 to your PC and use the StyleToMidi program from korg support. I have done this and it is not working. There are no real instructions and I have looked in the Help of the program and no answer there. Maybe there is another way?? Like can one just save the PA50 style to the floppy? Maybe I can connect the PA50 MIDI to the PA500 MIDI and transfer it that way?
Thanks

OmarNoori · Senior Member Joined: 14 Feb 2008 Posts: 292

im not sure but i think u might have to download a driver Rolling Eyes

_________________

Korg Pa800

Mickb · Posted: Tue Mar 11, 2008 1:54 am Post subject:

hi there

have you tried loading the style into a spare slot in the user bank?

Then you could save your user bank onto a floppy and try transfer it that way

Regards

Mick

redkeys88 · Posted: Tue Mar 11, 2008 11:14 pm Post subject: Style to PC - PA50

Found the answer to this by calling Korg. To get a style to your PC for the PA50 you 1) Record the Style to User Slot and 2) Save all to the floppy. What it actually does is make 3 files on the floppy of the 3 user banks. User01.sty, User02.sty and User03.sty. My ultimate goal was to get the Copla Style over to my new PA500. What I did next was to copy the User01.sty which had many styles but in slot 1 was the Copla style to my PA500 using the USB and it is all working. Yea! There you have it. Thanks guys.