View previous topic :: View next topic |
Author |
Message |
Bernie9 Senior Member
Joined: 28 Sep 2007 Posts: 488 Location: Port Charlotte,FL
|
Posted: Sat Sep 29, 2007 5:38 pm Post subject: Mic Effects |
|
|
I just got my PA800 and want to cut down the reverb. I went into Global/Processor Presets and changed to Room. I am getting an echo,though the reverb is better. I don't want to start changing other parameters for fear of messing the whole thing up.
Any suggestions would be appreciated.
Bernie |
|
Back to top |
|
|
Bernie9 Senior Member
Joined: 28 Sep 2007 Posts: 488 Location: Port Charlotte,FL
|
Posted: Sat Sep 29, 2007 5:58 pm Post subject: |
|
|
Nevermind, I found the problem in Feedback %. |
|
Back to top |
|
|
BasariStudios Approved Merchant
Joined: 29 May 2005 Posts: 6510 Location: NYC, USA
|
Posted: Sat Sep 29, 2007 6:01 pm Post subject: |
|
|
Yes Bernie but you dont cut down reverb with feedback, there is WET/DRY
parameter for it, AMOUNT FX. _________________ http://www.basaristudios.com
Cubase 8.5 Pro. Windows 7 X64. ASUS SaberTooth X99. Intel I7 5820K. ASUS GTX 960 Strix OC 2GB. 4x8 GB G.SKILL.
2 850 PRO 256GB SSDs. 1 850 EVO 1TB SSD. Acustica: Nebula Server 3 Ultimate, Murano, Magenta 3, Navy, Titanium. |
|
Back to top |
|
|
Bernie9 Senior Member
Joined: 28 Sep 2007 Posts: 488 Location: Port Charlotte,FL
|
Posted: Sat Sep 29, 2007 8:03 pm Post subject: |
|
|
Thanks for the reply. Are you saying then to reduce the Amount of FX ,and leave the feedback,time,etc. alone ? |
|
Back to top |
|
|
BasariStudios Approved Merchant
Joined: 29 May 2005 Posts: 6510 Location: NYC, USA
|
Posted: Sat Sep 29, 2007 8:06 pm Post subject: |
|
|
Well if you know what you are doing its nice to adjust other parameters too
but the AMOUNT is the AMOUNT. If you are satisfied with the reverb but not
the AMOUNT then adjust the AMOUNT. _________________ http://www.basaristudios.com
Cubase 8.5 Pro. Windows 7 X64. ASUS SaberTooth X99. Intel I7 5820K. ASUS GTX 960 Strix OC 2GB. 4x8 GB G.SKILL.
2 850 PRO 256GB SSDs. 1 850 EVO 1TB SSD. Acustica: Nebula Server 3 Ultimate, Murano, Magenta 3, Navy, Titanium. |
|
Back to top |
|
|
Dnj Senior Member
Joined: 19 May 2007 Posts: 268
|
Posted: Sat Sep 29, 2007 8:10 pm Post subject: |
|
|
Bernie I adjust the mic rev using my slider on board try that for now until you get familiar with the unit. |
|
Back to top |
|
|
Bernie9 Senior Member
Joined: 28 Sep 2007 Posts: 488 Location: Port Charlotte,FL
|
Posted: Sat Sep 29, 2007 8:35 pm Post subject: |
|
|
DUH
What slider ? |
|
Back to top |
|
|
Bernie9 Senior Member
Joined: 28 Sep 2007 Posts: 488 Location: Port Charlotte,FL
|
Posted: Sat Sep 29, 2007 8:47 pm Post subject: |
|
|
Slider A is mic volume level. Slider B can be assigned to FX.
Right ? |
|
Back to top |
|
|
Bernie9 Senior Member
Joined: 28 Sep 2007 Posts: 488 Location: Port Charlotte,FL
|
Posted: Sat Sep 29, 2007 8:58 pm Post subject: |
|
|
I wrote the -16 FX globally, but then went back to -6 and am using the slider. This way I can compensate for the room.
Thank you both
Bernie |
|
Back to top |
|
|
Dnj Senior Member
Joined: 19 May 2007 Posts: 268
|
Posted: Sun Sep 30, 2007 3:11 am Post subject: |
|
|
bernie little by little it all gets done .... |
|
Back to top |
|
|
|